EXAIR Super Air Wipes: Overview

Super Air Wipe

EXAIR manufactures two types of Air Wipes; the Standard Air Wipe™ and the Super Air Wipe™.  They are designed to blow an air stream in a concentric pattern around the outside of pipes, cables, extruded shapes, hoses and much more.  In this blog, the focus is on the features and benefits of the Super Air Wipes.  Their unique design, variety of sizes, and construction definitely makes this product “Super”.

The aluminum Super Air Wipe is available in 11 sizes; the stainless steel Super Air Wipe comes in 5 sizes…all from stock.

The Super Air Wipes are used to blow-off, cool, clean and dry products.  The air is blown in a conical 360o pattern completely around the outside of parts.  EXAIR engineered a Coanda profile to entrain large amounts of ambient air.  This will increase efficiency by using less compressed air and still generate a large force to perform the task.  The Coanda profile is set at a 30o angle to increase the contact area and keep debris away from the portion of the product that has already been cleaned.

The construction of all the Super Air Wipes is also unique.  It has a split design to allow for an opening to place around the part which eliminates the need to thread material through the wipe. They also use stainless-steel screws and stainless-steel shims.  For diameters up to 4” (102mm), they will come with a braided stainless-steel hose to connect both halves.  The stainless-steel components give the units better corrosion resistance, higher temperature ratings, and more durability.  EXAIR manufactures the Super Air Wipes with two different body materials, aluminum and 303 stainless steel.  EXAIR stocks the aluminum models with inner diameters from 3/8” (10 mm) for wire and cables up to 11” (279mm) for large pipes and hoses.  The aluminum models have a temperature range good to 400oF (204oC).  We also stock the stainless-steel models from ½” (13mm) to 4” (102mm) inner diameters, and they have a temperature range up to 800oF (427oC).  If you require different diameters or materials, don’t be afraid to ask.  EXAIR also makes specials.

Super Air Knife Kit

We offer more than just the Super Air Wipes.  We also have kits to help get the most out of the air wipes.  A kit will include the Super Air Wipe, a filter, a regulator and a shim set.  The filter will remove bulk liquids and debris from the compressed air to keep the performance optimal.  The Regulator is used to control the force.  This helps to not over-use the amount of compressed air required for the job.  With a regulator, you can make fine adjustments to get the proper amount of air.  For coarse adjustments, you can add shims to increase the air flow and force.  They are easy to install on the Super Air Wipes to allow for applications to have more cooling, faster drying, and better removal for tough debris.  For cleanliness and control, the Super Air Wipe Kits would be recommended for your application.

Here are some additional advantages in using the EXAIR Super Air Wipes that I did not cover.  They are OSHA safe in dead-end pressure and noise exposure.  So, they are quiet.  In each half of the bodies, we placed pre-tapped holes for easy mounting for brackets or attachments.  They do not have any moving parts or require any electricity to operate.  The non-contact wiping actions that the Super Air Wipe can provide helps to support cleaning items without affecting the surface finish.  Also, you won’t have to worry about replacing cloths or brushes that will slow production and wear over time.

With the creation of the Super Air Wipe, uniform cleaning, cooling, and blowing around the outside of parts is a simple task.  You don’t have to worry about a variety of nozzles to target the circumference, or a fabricated blow-off device that will waste air and take much time out of your day.  A simple purchase of the Super Air Wipe is all you need.  If you need help in selecting the proper product for your application, you can contact an Application Engineer at EXAIR for help.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s