Effectively and Efficiently Remove Chips and Debris from Blind Holes

I was recently contacted by an automotive parts manufacturer that was looking for a solution for cleaning out blind holes in a variety of machined parts. After discussing the application, we settled on a 1697SS-6-CS VariBlast Compact Safety Air Gun with Pico Nozzle, 6” Extension, and a Chip Shield. The small M5 nozzle at the tip of the gun allowed them to insert it inside of the hole and dislodge the hard-to-reach chips inside of the holes.

1697SS VariBlast Compact Safety Air Gun

This worked very well for removing the chips, but they were encountering an unexpected issue as these chips were now getting lodged in other areas of the part as they were ejected. They then had to visually inspect the entire part after each blowoff to ensure that everything was completely removed.

What they thought to be an ideal solution, ended up not being the best fit. They gave us a call back to inquire about an alternative solution. We offer another product, the Deep-Hole Vac-U-Gun, that is capable of both removing chips and debris from blind holes and also vacuuming it away simultaneously.

This addresses the problem of dislodged chips being caught elsewhere on the parts. Fortunately, EXAIR offers an unconditional 30-day guarantee for all stock products. They were able to return the previously purchased gun and apply the credit towards the purchase of the Deep Hole Vac-u-Gun system.

The Deep Hole Vac-u-Gun is a low-cost solution to quickly remove chips and contaminants from grooves, containers, and drilled holes. In applications where simply blowing the debris out of the hole isn’t suitable, simply position the Deep Hole Vac-u-Gun over the hole and press the trigger. A small blow tube (3) dislodges and lifts the chips while the large suction tube (5) vacuums them away. The operator is then protected from flying debris since the contaminants are then contained within the suction tube and directed into a filter bag or other container with the included vacuum hose.

Sometimes we don’t always get it right on the first try. But, with the ability to take advantage of the 30-day guarantee we’ll make sure to get the best product to you for your application. With same day shipments with orders received by 3:00 ET for stock products, EXAIR can get a solution out to you quickly!

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s