Chip Shields, OSHA, And You

Safety is a key part of our culture at EXAIR Corporation.  We have regularly scheduled, all-hands required, safety training on a number of topics.  Our Order Entry team can likely tell you as much about our lockout/tagout procedures as our Machinists can.  Nobody even thinks about entering The Shop without safety glasses, and it’s not just because of the signs.

We pay attention to these…
…so we don’t ever have to use this.

OSHA 1910.242(b) states that “Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment. (emphasis mine)  All EXAIR Intelligent Compressed Air Products are engineered to meet the requirements of the first part (30psi outlet pressure to prevent dead ending…we’ve written about that numerous times, including here, here, and here) and we can also provide pre-installed devices to satisfy the second part:  the EXAIR Chip Shield.

Any EXAIR VariBlast or Heavy Duty Safety Air Gun can come fitted with a Chip Shield, and any Soft Grip Safety Air Gun, except for those with Stay Set Hoses, can as well.  Safety Air Guns with Back Blow Nozzles automatically come with a Chip Shield. The principle is simple: a clear polycarbonate (so you can still see what you’re doing) round disc slips over a short (or long if you want) pipe extension between the gun & the nozzle.  It’s fitted with a rubber grommet so you can position it to where it’s most effective – sometimes that might be closer to the part being blown off; sometimes it may be back a little closer to the operator.

EXAIR Safety Air Guns are available, from stock, with Chip Shields.

If you already have an air gun that’s doing the job, you can easily add an EXAIR Chip Shield to it.  They’re made to fit a wide range of extension diameters, and can even come with the extension if you need it.  We also stock a number of adapter fittings; if you know what threads your air gun has (or if you can send us some photos) we can quickly & easily spec those out for you.

Convenient and inexpensive “thumb guns” with cross drilled nozzles (left) are compliant with the first part of OSHA 1910.242(b). Fitting one with an EXAIR Chip Shield (center) makes it compliant with the second part. A Model 1102 Mini Super Air Nozzle (right) makes it quiet & efficient.
We can provide a Chip Shield for most any device with a threaded fitting. I couldn’t find a way to re-use the non-OSHA-compliant nozzle that came with this gun (thank goodness.)
Another example of a larger air gun fitted with a more powerful cross drill nozzle (left) that can be made totally OSHA compliant with an EXAIR Chip Shield (center.) An EXAIR High Force Super Air Nozzle (right) keeps the power, while reducing noise level and compressed air consumption (right.)

Since 1983, EXAIR Corporation has been manufacturing quiet, safe, and efficient compressed air products for industry (emphasis mine.)  If you have concerns or questions about safety in regard to your compressed air use, call me.

Russ Bowman
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s