A Cold Winter’s Chill and Vortex Tubes

Two weekends ago I had the pleasure of flying out to meet my friend in Colorado Springs and ski the weekend at Breckenridge. As an avid skier Breckenridge has been one of the resorts I have been wanting to ski since I started skiing out west. The weather was amazing and I couldn’t ask for better; the Saturday blue skies and cool breeze followed up by a Sunday of snow fall. The Trip was a dream come true. Breckenridge is specifically known for having high winds that howl across the peaks that stand at a max of 12,998 ft. above sea level. These chilling winds would freeze just about anyone if you aren’t dressed prepared for them as they blow right in your face on the lift. As I was sitting on the lift with these cold winds blowing in my face it brought to mind EXAIR’s Vortex Tubes, Cold Guns, and Cabinet Coolers.

EXAIR’s Vortex Tubes and similar products provide everything from a cool blast of air to a frigid breeze to cool off various parts and products. In a lot of smaller milling and grinding applications the Cold Gun has been used as a replacement to costly coolant-based alternatives. Vortex tubes have been used in cooling applications since 1945 and assist in everything from stress testing electronics to cooling down plastic parts during ultrasonic welding.

 Vortex tubes use a source of compressed air to create a hot and cold stream of air coming out on opposite ends of the device. This means that not only can the vortex tube be used for cooling but also heating applications. In one case a vortex tube was used to heat up an adhesive before it was sealed to get a better adhesion. Although the vortex tube can be used for heating purposes those applications are few and far between as usually a heating element or other heating source is more applicable.
Vortex tubes are quickly adjustable, just as the winds of Breckenridge can change from being a breeze to almost blowing you off of the mountain. Weather in the mountains is always varying and so are EXAIR’s Vortex Tubes.

If you have any questions or want more information on how we use our vortex tubes to improve processes all over industry. Give us a call, we have a team of application engineers ready to answer your questions and recommend a solution for your applications.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s