Over the years you may have read blog posts regarding the EXAIR Safety Air Guns.  You can find the blogs here, here and here. Today, I want to review a few available options for the Safety Air Guns.

Protect Workers From Flying Debris! – Chip Shields are durable polycarbonate shields that protect the operator from flying debris often seen when blowing off chips from machined parts. They are also useful to prevent coolant from splashing back, creating a mess during drying processes.

The Chip Shields are available for EXAIR’s VariBlast, Soft Grip, and Heavy Duty Safety Air Guns. The Chip Shield can be used on Safety Air Guns with or without an aluminum extension. They may be purchased as part of a new air gun system, or retrofitted as a Chip Shield Kit.  Consult an Application Engineer for selection assistance.

If you have a blow-off process where the air is to be directed at a distance away from the operator, or into a hard to reach location an extension is the solution. Available in lengths from 6″ (152mm) to 72″ (1829mm), with sizes as shown below, a length to meet most any requirement can be found. To add an extension to an air gun, simply add -xx to the current part number.

And, if you need a 12′ coiled air hose, to use with your Safety Air Gun, we have them available and in stock. Available with 1/8 NPT, 1/4 NPT or 3/8 NPT male end swivel connections. Avoid tangled and messy air lines and keep things neat!

To discuss your application and how an EXAIR Intelligent Compressed Air Product can improve your process, feel free to contact EXAIR, myself, or one of our other Application Engineers. We can help you determine the best solution!

Jordan Shouse
Application Enginee

Send me an Email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS