Ionizing Points for Static Elimination Without Airflow

I almost wore three socks this morning: one on each foot, and one inside the sleeve of my shirt. I don’t know if it got in there through the agitation & spin of the washing machine, or the tumbling action in the dryer, but I know how it stayed there through the removal from the dryer, folding, and placing in my shirt drawer: static charge. This was evident from the ‘snap, crackle, and pop’ it made when I pulled it out.

Static charge is all around us. It’s mildly annoying in the clothes we pull from the dryer or the packing peanuts we can’t shake from our hands when unpacking from that new whatever-I-just-ordered from that website. It’s surprisingly uncomfortable when we touch the light switch after walking across a carpeted floor. And it’s terrifying when a lightning bolt hits so close that there’s no discernible delay for the thunder.

It’s also prevalent in many industrial processes: molding, trimming, wrapping (or unwrapping), bag & bottle filling, printing…just to name a few. Some materials are more prone to it than others, but all it takes is contact, and separation, of non-conductive surfaces to generate a static charge. The faster and/or more frequent the contact & separation, the higher the charge, and oftentimes there’s no better way to build up static electricity than sliding or rubbing those surfaces together.

EXAIR has a wide variety of Static Eliminator solutions: Super Ion Air Knives for webs or sheets up to 9 feet in width, Ion Air Cannons or Jets for more focused, conical ionized air blowing, Ion Air Guns for handheld operations, Super Ion Air Wipes for tube, pipe, extruded shapes, etc., and Intellistat Ion Air Guns & Nozzles for laboratory or clean room situations. Two of our Static Eliminator ProductsIonizing Bars & Ionizing Points – require no compressed air at all for operation, and one of those is the point (‘pun intended’ or ‘spoiler alert’ – you decide) of today’s blog.

The EXAIR Gen4 Ionizing Point is compact, versatile, and easy to install. It’s perfect for applications where even a light breeze worth of air flow would be disruptive or problematic. It’s also great for ionizing an existing air flow, like in a blower duct or air conveyance line. If limited space is a problem, it’s got the smallest footprint of just about any static eliminator on the market.

The EXAIR Model 8199 Gen4 Ionizing Point packs a LOT of static elimination in a small package.

They have impressive static dissipation performance as well, as seen in the table below. The only maintenance that’s required is a periodic cleaning of the emitter point (with the Power Supply OFF, using a soft bristled, dry brush). Should the emitter point become fouled, it can also be easily replaced.

If you’ve got problems with static charge, EXAIR has a comprehensive offering of solutions…give me a call to find out more.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Leave a Reply