Chip Shields, OSHA, And You

Safety is a key part of our culture at EXAIR Corporation.  We have regularly scheduled, all-hands required, safety training on a number of topics.  Our Order Entry team can likely tell you as much about our lockout/tagout procedures as our Machinists can.  Nobody even thinks about entering The Shop without safety glasses, and it’s not just because of the signs.

We pay attention to these…
…so we don’t ever have to use this.

OSHA 1910.242(b) states that “Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment. (emphasis mine)  All EXAIR Intelligent Compressed Air Products are engineered to meet the requirements of the first part (30psi outlet pressure to prevent dead ending…we’ve written about that numerous times, including here, here, and here) and we can also provide pre-installed devices to satisfy the second part:  the EXAIR Chip Shield.

Any EXAIR VariBlast or Heavy Duty Safety Air Gun can come fitted with a Chip Shield, and any Soft Grip Safety Air Gun, except for those with Stay Set Hoses, can as well.  Safety Air Guns with Back Blow Nozzles automatically come with a Chip Shield. The principle is simple: a clear polycarbonate (so you can still see what you’re doing) round disc slips over a short (or long if you want) pipe extension between the gun & the nozzle.  It’s fitted with a rubber grommet so you can position it to where it’s most effective – sometimes that might be closer to the part being blown off; sometimes it may be back a little closer to the operator.

EXAIR Safety Air Guns are available, from stock, with Chip Shields.

If you already have an air gun that’s doing the job, you can easily add an EXAIR Chip Shield to it.  They’re made to fit a wide range of extension diameters, and can even come with the extension if you need it.  We also stock a number of adapter fittings; if you know what threads your air gun has (or if you can send us some photos) we can quickly & easily spec those out for you.

Convenient and inexpensive “thumb guns” with cross drilled nozzles (left) are compliant with the first part of OSHA 1910.242(b). Fitting one with an EXAIR Chip Shield (center) makes it compliant with the second part. A Model 1102 Mini Super Air Nozzle (right) makes it quiet & efficient.
We can provide a Chip Shield for most any device with a threaded fitting. I couldn’t find a way to re-use the non-OSHA-compliant nozzle that came with this gun (thank goodness.)
Another example of a larger air gun fitted with a more powerful cross drill nozzle (left) that can be made totally OSHA compliant with an EXAIR Chip Shield (center.) An EXAIR High Force Super Air Nozzle (right) keeps the power, while reducing noise level and compressed air consumption (right.)

Since 1983, EXAIR Corporation has been manufacturing quiet, safe, and efficient compressed air products for industry (emphasis mine.)  If you have concerns or questions about safety in regard to your compressed air use, call me.

Russ Bowman
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

A Brief History of Compressed Air

So where exactly did compressed air come from? How did it become so widely used and where will it go? Both of these are great questions and the answers lie below.

Compressed air can be traced all the way back to the classic bellows that were used to fuel blacksmith fires and forges.  These started as hand pumped bellows, they then scaled up to foot pumped, multiple person pumped, oxen or horse driven and then eventually waterwheel driven.  All of these methods came about due to the demand for more and more compressed air. These bellows did not generate near the amount of air pressure or volume needed for modern day practices yet they worked in the times.  These early bellows pumps would even supply miners with air.

With the evolution of metallurgy and industry these bellows were replaced by wheel driven fans, then steam came about and began generating more industrial sources of power.  The main issue with steam was that it would lose its power over longer runs of pipe due to condensing in the pipes.  Thus the birth of the air compressor was born. One of the largest projects that is noted to first use compressed air was in 1861 during the build of the Mont Cenis Tunnel in Switzerland in which they used compressed air machinery.  From here the constant need and evolution for on-demand compressed air expanded.  The picture below showcases two air compressors from 1896.

compressed_air_28189629_281459402261829
Air Compressors from the old days.

The compressors evolved over time from single stage, to two-stage reciprocating, on to compound, rotary-screw compressors, rotary vane, scroll, turbo, and centrifugal compressors with variable frequency drives.  The efficiency of each evolution has continued to increase.  More output for the same amount of input.  Now we see a two-stage compressor, considered old technology, and wonder how the company can get any work done.

All of the technological advances in compressor technology were driven by the demand sides of the compressed air systems.  Companies needed to power more, go further, get more from less, ultimately increase production.  With this constant increase in demand, the supply of compressed air increased and more efficient products for using compressed air began to evolve so the air was used more efficiently.

Enter EXAIR, we evolved the blowoff to meet the increasing demands of industrial companies to get the same amount of work done with less compressed air. We have continually evolved our product offering since 1983.  It all started with just a few typed pages of part numbers and has evolved to a 208 page catalog offering of Intelligent Compressed Air Products® for industry.  We will also continue to evolve our product designs for continued improvement of compressed air usage.  This is all to better help companies retain their resources.

cat32_500p
EXAIR Catalog 32

If your company uses compressed air and you aren’t sure if it is efficiently being utilized, contact an Application Engineer.  Thanks for joining us for the brief history lesson, we look forward to hearing from you and seeing what the future brings.

Brian Farno
Application Engineer
@EXAIR_BF BrianFarno@EXAIR.com

 

Compressed air (1896) (14594022618).jpg – Wikimedia Commons – Internet Archive Book Images – Link