Compressed Air Demand Preventative Maintenance

Preventative maintenance for compressed air demand products is a simple as keeping the compressed air clean and condensate free. It is simple because all it takes is a filter and keeping the filter element clean, just like you do for your home furnace and/or air conditioner.

I received a phone call from a customer that needed replacement elements for EXAIR filters.  They were using four different models of Filter Separators and Oil Removal Filters.  The filters had been in service for one year, and the internal elements needed to be changed.  They requested a quote to replenish the replacement elements that they stocked as a preventative measurement.  What an idea!

Majority of EXAIR products use compressed air for cleaning, cooling, conveying, static elimination, coating and more.  To help keep your EXAIR products running efficiently, it is important to supply them with clean, dry, pressurized air.  EXAIR offers a line of Filter Separators and Oil Removal Filters to supply quality air to your equipment.  In this blog, I will explain the two types of filters that we carry and the maintenance requirements.  The filters and preventative measures can play an important part in your compressed air system.

Filter Separators are used to remove bulk liquid and contamination from the compressed air stream.  They utilize a 5-micron filter with a mechanical separation to help remove large amounts of dirt and water.  This type of filter would be considered the minimum requirement for filtration.  Most of the Filter Separators come with an auto-drain to automatically dispense the collection of oil and water.  EXAIR offers a variety of port sizes and flow ranges to meet your pneumatic flow requirement.  For maintenance, the filter elements should be changed once a year or when the pressure drop reaches 10 PSID, whichever comes first.  I created a list in Table 1 showing the correct replacement element kits for each model number.  And for any reason, if the bowl or internal components get damaged, we also have Rebuild Kits as well.  Just remember, the air quality is very important for longevity and functionality for pneumatic products and even for EXAIR products.

The Oil Removal Filters can make your compressed air even cleaner.  They work great at removing very small particles of dirt and oil.  They are made from glass fibers and can remove particles down to 0.01 micron.  They are designed to collect small particles and to coalesce the liquid particles into a large droplet for gravity to remove.  Because of the fine matrix, Oil Removal Filters are not great for bulk separation.  If you have a system with lots of oil and water, I would recommend to use the Filter Separator upstream of the Oil Removal Filter.  As with the Filter Separator, the filter element should be changed once a year or at a pressure drop of 10 PSID.  EXAIR also offers a variety of port sizes and flow ranges.  Table 1 below shows the replacement Element Kits as well as the Rebuild Kits.  If the application requires very clean compressed air, the Oil Removal Filter should be used.

Table 1

By using EXAIR filters, they will clean your compressed air to prevent cross contamination, performance issues, and premature failures.  As an ounce of prevention, you can add the replacement elements in stock and enter them in your preventative maintenance program.  With clean quality air, your pneumatic system and EXAIR products will provide you with effective, long-lasting performance without maintenance downtime.  If you would like to discuss the correct type of filters to use in your application, you can speak with an Application Engineer.  We will be happy to help you.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

What’s The Big Deal About Clean Air?

Compressed air isn’t called manufacturing’s “Fourth Utility” (the first three being electricity, water, and natural gas) for nothing. Pneumatic tools are popular because they’re often so much lighter than their electric counterparts. Compressed air can be stored in receiver tanks for use when other power supplies are unavailable or not feasible. Many compressed air operated products can be made to withstand environmental factors (high/low temperature, corrosive elements, atmospheric dust, oil, other contaminants, etc.,) that would make electric devices very expensive, unwieldy, or impractical.

One of the most valuable considerations, though, is that your compressed air system is, by and large, under your control.  The type and capacity of your air compressor can be determined by your specific operational needs.  The header pressure in your supply lines is based on the applications that your air-operated devices are used for.  And the performance & lifespan of every single component in your compressed air system is determined by the care you take in maintaining it.

I covered the importance of compressed air system maintenance in a blog a while back…today, I want to focus on clean air.  And, like the title (hopefully) makes you think, it’s a REALLY big deal.  Consider the effects of the following:

Debris: solid particulates can enter your air system through the compressor intake, during maintenance, or if lines are undone and remade.  If you have moisture in your air (more on that in a minute,) that can promote corrosion inside your pipes, and rust can flake off in there.  Almost all of your air operated products have moving parts, tight passages, or both…debris is just plain bad for them.  And if you use air for blow off (cleaning, drying, etc.,) keep in mind that anything in your compressed air system will almost certainly get on your product.

Your compressed air system may be equipped with a main filter at the compressor discharge.  This is fine, but since there is indeed potential for downstream ingress (as mentioned above,) point-of-use filtration is good engineering practice.  EXAIR recommends particulate filtration to 5 microns for most of our products.

Water: moisture is almost always a product of condensation, but it can also be introduced through faulty maintenance, or by failure of the compressor’s drying or cooling systems.  Any way it happens, it’s also easy to combat with point-of-use filtration.

EXAIR includes an Automatic Drain Filter Separator in our product kits to address both of these concerns.  A particulate filter element traps solids, and a centrifugal element “spins” any moisture out, collecting it in the bowl, which is periodically drained (automatically, as the name implies) by a float.

Point of use filtration is key to the performance of your compressed air products, and their effectiveness. Regardless of your application, EXAIR has Filter Separators to meet most any need.

Oil: many pneumatic tools require oil for proper operation, so, instead of removing it, there’s going to be a dedicated lubricator, putting oil in the air on purpose.  Optimally, this will be as close to the tool as possible, because not all of your compressed air loads need oil…especially your blow offs.  If, however, a blow off device is installed downstream of a lubricator (perhaps due to convenience or necessity,) you’ll want to do something about that oil. Remember, anything in your system will get blown onto your product.

If this is the case, or you just want to have the cleanest air possible (keep in mind there is no downside to that,) consider an EXAIR Oil Removal Filter.  They come in a range of capacities, up to 310 SCFM (8,773 SLPM,) and the coalescing element also offers additional particulate filtration to 0.03 microns.

In closing, here’s a video that shows you, up close and personal, the difference that proper filtration can make:

If you’d like to discuss or debate (spoiler alert: I’ll win) the importance of clean air, and how EXAIR can help, give me a call.

Russ Bowman
Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Oil Removal Filters – Keeping Compressed Air Clean

Compressed air filters help to keep the air clean and condensate free to protect equipment from dust, dirt, pipe scale, oil and water. Even though the compressed air system will typically have a main dryer, additional treatment is often necessary. For this discussion, we will focus on the oil removal process and filter type.

After the compressed air has passed through a particulate filter, the dirt, dust and water droplets have been removed.  Oil that is present is much smaller in size, and mostly passes though the particulate filter.  The installation of a coalescing filter will provide for the removal of the majority of the fine oil aerosols that remain. The coalescing filter works differently than the particulate filters. The compressed air flows from inside to outside through the coalescing filter media. The term ‘coalesce’ means to ‘come together’ or ‘form one mass.’  The process of coalescing filtration is a continuous process where the small aerosols of oil come in contact with fibers of the filter media. As other aerosols are collected, they will join up and ‘come together’ and grow to become an oil droplet, on the downstream or outside surface of the media.  Gravity will then cause the droplet to drain away and fall off the filter element.

9005
Example of a 0.03 Micron Coalescing Oil Removal Filter

Some important information to keep in mind –

  • Change the filter regularly, not just when the differential pressures exceeds recommended limits, typically 5 PSI
  • Coalescing filters will remove solids too, at a higher capture rate due to the fine level of filtration, using a pre-filter for solids will extend the life
  • Oil free compressors do not provide oil free air, as the atmospheric air drawn in for compression contains oil vapors that will cool and condense in the compressed air system.

If you would like to talk about oil removal filters or any of the EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

Removing Condensation Is Key To Maintaining Performance

When air is compressed, it is heated to a point that causes the water or moisture  to turn to vapor. As the air begins to cool, the vapors turn to condensation, which can cause performance issues in a compressed air system. Many times this condensation forms in the basic components in the system like a receiver tank, dryer or filter.

Condensation is formed from water vapor in the air

It’s important to remove this condensation from the system before it causes any issues. There are four basic types of condensate drains that can be used to limit or prevent loss of air in the system.

The first method would be to have an operator manually drain the condensation through a drain port or valve. This is the least reliable method though as now it’s the operator’s responsibility to make sure they close the valve so the system doesn’t allow any air to escape which can lead to pressure drops and poor end-use device performance.

Example of a float drain

Secondly, a float or inverted bucket trap system can be used in plants with regular monitoring and maintenance programs in place to ensure proper performance.. These types of drain traps typically require a higher level of maintenance and have the potential to lose air if not operating properly.

An electrically actuated drain valve can be used to automatically drain the condensate at a preset time or interval. Typically these incorporate a solenoid valve  or motorized ball valve with some type of timing control.  These types of systems can be unreliable though as the valve may open without any moisture being present in the line, which can result in air loss or it may not be actuated open long enough for acceptable drain off. With these types of drains, it’s best to use some type of strainer to remove any particulate that could cause adverse performance.

Lastly,  zero air-loss traps utilize a reservoir and a float or level sensor to drain the condensate and maintain a satisfactory level. This type of setup is very reliable but does require the reservoir be drained frequently to keep the system clean and free of debris or contaminants.

If you have any questions or would like to discuss a particular process, contact an application engineer for assistance.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

 

Condensation image courtesy of Anders Sandberg via creative commons license

Float drain image courtesy of the Compressed Air Challenge