I Pick Things Up & I Put Them Down

This past weekend in Columbus, OH was a sporting event hosted by Arnold Schwarzenegger.  This event has many aspects of it and this past weekend was the first year where spectators were not permitted due to the COVID-19 risks and scares.  The caterer for the event had already prepped all of the food to prepare for thousands of people so instead of donating locally, they connected with head chefs in Nashville, TN to create a “tailgate extravaganza” to try and lift the community up after the recent tornado and storms ravaged the area and demolished homes as well as communities.  The Arnold still happened, with participants only, they were all, “Picking Things Up and Putting Them Down.”

Arnold Sport’s World Record Lift

Seeing these giant athletes perform deadlifts always reminds me of the EXAIR Adjustable E-Vacs and how they are used frequently to pick things up and put them down.  When determining the correct Adjustable E-Vac I always like to start with the shape, weight, and surface of the part.  This is how I determine which vacuum cup can be utilized.  The good news is as a customer, the choice doesn’t have to be made alone, that is why the Application Engineering team is here, we’ll help you determine which vacuum cup will suit the given application.

These are all examples of how an E-Vac pick-and-place system is just a solenoid valve away from automation.

Some of the factors we use to determine the suction cup is listed out below.

Is the lift going to be a vertical cup lift or a horizontal cup lift?  This means is the face of the cup vertical, picking up a box from the ground by the sides, or is it going to be horizontal where the face of the cup sits horizontally over the part.

For a vertical cup face, if lifting the part up vertically then a bellows cup will not be suitable and something with a cleat will be needed due to the rigidity of the cup to help keep the cup and part stable.  The bellows may collapse due to the weight of the product, where the cleats will interface with the part and create a solid connection to aid in the lift.

For a horizontal cup face, if lifting the part up vertically then a bellows cup would work ideal in the event the surface is uneven.  Maybe one end is slightly taller, in this scenario, a bellows cup would help the cups to all seal to the surface and still be able to pick up the item.  These cups are also thinner to help adapt to an irregular surface on the part or to help keep suction if the part deforms upon being picked up. The bellows is not recommended for rather heavy objects as the bellows may collapse under extensive load and cause the cup to lose suction.

Talking about the weight of the item, this also becomes a major factor as each cup has a maximum lifting weight and that is determined by the surface area of the cup as well as whether it has cleats, bellows, or just a plain cup.  Our goal when sizing the cups to the parts is to ensure they are going to engage the surface in a solid secure manner that makes the lifting rig safe and stable to use.

For example, take a look at this solar lens manufacturer who utilizes many EXAIR products in this pick and place operation.

If you would like to discuss your Adjustable E-Vac, Vacuum Cup, or heavy lifting, please contact me.

Brian Farno
Application Engineer
@EXAIR_BF
BrianFarno@EXAIR.com

 

The 2020 ASF Media Room – Arnold Sports Festival, 2020 – https://www.arnoldsportsfestival.com/visitor-info/media/

 

What is the Venturi Effect?

In 1797 a Italian physicist named Giovanni Battista Venturi wrote a dissertation on the “Venturi Effect”.  However, an actual device was never created or applied until 1888 where Clemens Herschel was awarded the patent for the first Venturi tube.

The Venturi effect is a decrease in fluid pressure when fluid flows through a constricted area of a pipe.  In other words, as the diameter becomes smaller, the fluid velocity becomes faster.  This increase in velocity will create a lower pressure just past the constricted area.  When designed correctly, you can create a strong vacuum or a large negative pressure.

The EXAIR E-Vac® Vacuum Generators use this phenomenon by using compressed air as the fluid.  This type of Venturi tube restricts the internal area to generate a fast velocity through the body creating a vacuum pressure for suction.

EXAIR offers three types of Venturi tubes; low vacuum, high vacuum and adjustable.  Low vacuum units are typically used with porous material because the trade off for low vacuum is higher vacuum flow. The high vacuum generators can create a vacuum level as high as 27” Hg (71 KPa).  The Adjustable E-Vacs can alter the internal air velocities by turning the body and getting different vacuum pressures.  Without any moving parts or electric motors to break, the EXAIR E-Vacs are a simple design that is very durable, effective and long-lasting.  A great product for applications like pick and place, clamping, lifting and vacuum forming.

In-Line E-Vac How It Works
EXAIR E-Vacs provide instantaneous vacuum response, and are engineered for high efficiency to minimize air consumption.

The Venturi effect was discovered in 1797, brought into existence in 1888, and is still used in vacuum applications to this very day.  If you have an application where a Venturi tube could help you, please contact an Application Engineer.  We will be happy to assist you.

Jordan Shouse
Application Engineer
Find us on the Web http://www.exair.com/28/home.htm
Follow me on Twitter
Like us on Facebook

Porous and Non-Porous E-Vac Vacuum Generators

Getting a vacuum from compressed air seems a bit like magic, but it works and it works well. EXAIR’s E-Vac® Vacuum Generators are compressed air powered, single stage vacuum generators. They are a low cost way to create vacuum for pick and place, clamping, lifting, chucking, vacuum forming and other applications.

The Low Vacuum Generators are ideal for ‘porous’ types of applications.  When we say ‘porous’ we are describing those processes where a lighter vacuum level combined with higher vacuum flows are needed. A good example of this is lifting a cardboard box. The cardboard is not air tight, and when you place a vacuum on it, air is able to be pulled through the cardboard. To maintain the vacuum level, the air needs to be able to be pulled through the cardboard and exhausted as fast as it is being pulled through in order to maintain the vacuum level. This requires higher vacuum flow and the design of the Low Vacuum Generator allows for the development of a good vacuum level and a high rate of vacuum flow.

The High Vacuum Generator is ideal for ‘non-porous’ type of applications. ‘Non-porous’ are those processes where the material is air tight, and no or very little air can pass through. Material such as glass, ceramic, and steel are ‘non-porous’. Because little or no air passes through, the need for high vacuum flow is not as important, and the highest of vacuum level can be achieved. A perfect vacuum is 29.92 in-Hg, and the High Vacuum Generator is designed to reach vacuum levels of 27 in-Hg, or a 90% vacuum level.

 

E-Vac Video

 

Click above Image to View the Video

Both the Low Vacuum and High Vacuum Generators come in 7 different sizes, ranging from light to very strong vacuum capabilities, to match any application. Special Kits are  available as a way to experiment with an assortment of vacuum cups to determine the best configuration.

evac_nonporouskit
E-Vac Kit

And for maximum flexibility, EXAIR offers the Adjustable E-Vac Vacuum Generator. Engineered for high efficiency, compressed air can be minimized due to the ability to adjust and tune the vacuum flow and level to perfectly match the application requirements.

adjevac
Lifting a Concrete Block with the Adjustable E-Vac Vacuum Generator

If you have questions about vacuum generation and the E-Vac or any of the 15 different EXAIR Intelligent Compressed Air® Product lines, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.

 

Brian Bergmann
Application Engineer
Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

Vacuum Generator Accessories

In my last blog, I went over How to Choose/Build an E-Vac system, and you can read about that here–  The E-Vac’s are a compressed air powered, single stage vacuum generator, providing a low cost solution for creating a vacuum for many applications. Today, we will look at the many accessories that are available to complete a vacuum system best suited to your vacuum application.

For pick and place operations and hold down or clamping processes, we offer an array of Vacuum Cups. Available from stock are small and large Round, Oval, and Bellows styles. Round cups are best suited for smooth, flat surfaces.  Oval cups provide the most vacuum due to the larger surface area, making them ideal for lifting heavy loads. The Bellows style is best suited for textured or uneven surfaces, where the folds provide a collapsible area that allows the cup to compress and seal to the uneven surface.

vacupfam
Small and Large Round, Oval and Bellows Vacuum Cups

For vacuum processes where personnel are nearby, there are two (2) types of mufflers available to reduce the sound level to comply with the limits OSHA Standard 29 CFR – 1910.95(a) has established. The EXAIR E-Vac Mufflers are designed so that the E-Vac exhaust is not impeded, so that the highest and fastest vacuum response is achieved. The Standard Muffler (for use with In-Line E-Vacs only) has a closed end and is best suited for vacuum draws that are free from dust and debris.  The Straight Through Muffler is open all the way through and is recommended for those vacuum draws where there will be dirt and debris, since it will not plug up. The Straight Through style offers the best sound level reduction, up to 26 dBA.

E-Vac Mufflers
Standard and Straight Through Mufflers

The vacuum port of the E-Vacs has an NPT threaded connection and with a suitable connector, a vacuum cup can be closely installed, minimizing the system air volume. When vacuum cups are to be remotely mounted, Push-In Connector Type Fittings of assorted styles are available along with the polyurethane tubing to make the installation and vacuum plumbing a cinch.

E-Vac Fittings
Push-In , Swivel Elbow, Swivel Branch Tee, and Bulkhead Connectors

And finally, to get the best performance and maintenance free operation from your E-Vac, always use a source of clean, dry compressed air. We can help you do that with a wide array of Automatic Drain Filter Separators and Oil Removal Filters sized to pair up with the various E-Vac’s. Also available are Pressure Regulators, Vacuum Gauges, Manual Shut Off Valves, Solenoid Valves, and Compressed Air Hose.

If you have questions about E-Vacs and accessories or any of the 15 different EXAIR Intelligent Compressed Air® Product lines, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer
Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB