Deep Hole Vac-u-Gun – Blow Chips Loose and Vacuum Them Away in One Step!

Last week, we looked at the Vac-u-Gun, and you can take a look at that blog here.

This week I wanted to present the Deep Hole Vac-u-Gun, a special iteration of the Vac-u-Gun, designed to provide a solution to the troublesome process of cleaning cavities and drilled holes.

The Deep Hole Vac-u-Gun is a low cost solution to quickly remove chips and debris from grooves and drilled holes where blow gun could create potentially hazardous flying debris. The Deep Hole Vac-u-Gun is simply positioned over the hole, and the trigger squeezed and then a small blow tube delivers a a stream of air to dislodge and lift the chips while the large suction tube vacuum them away. The operator is protected form flying debris since all chips and debris is contained within the clear suction tube. The device is capable of cleaning holes up to 1-1/4″ (32mm) diameter and 18″ (457mm) deep!

How does the Deep Hole Vac-u-Gun work?

dhvghowani
How the Deep Hole Vac-u-Gun Works

 


Compressed air, normally 80-100 PSIG (5.5 – 6.9 bar), flows through the inlet (1) into an annular plenum chamber (2) when the trigger is pressed. A small amount of air is injected into the blow tube (3) to provide agitation and lift to the chips or debris. The larger airflow is injected into the the throat of the gun through directed nozzles (4). The jets of air create the vacuum at the intake (5) which draws the material in and accelerates it through the unit. The chips, debris or other particulates can then be exhausted into a filter bag or hose attached to the Deep Hole Vac-u-Gun System.


 

We have found many applications where the Deep Hole Vac-u-Gun is beneficial- including removing chips and debris in:

Holes in fixtures, drilled plastics, T-slots’groove cleaning , coolant evacuation from parts, woodworking, tapped holes, cavity evacuation, and many more!

There are many advantages to the Deep Hole Vac-u-Gun, and some are:

Low cost, no moving parts/maintenance free, durable die cast construction, eliminates shock hazard – no electricity, meets OSHA pressure requirements, safe operation – no flying chips, lightweight and portable, and quiet.

The Deep Hole Vac-u-Gun uses less compressed air than ordinary blow guns, and the amplified output flow is 12 times the air consumption rate.

Deep Hole Vac-u-Gun Specifications

Note that the Deep Hole Vac-u-Gun should not be operated without a filter bag or vacuum hose attached to the exhaust.

There are three (3) Deep Hole Vac-u-Gun System options-

Deep Hole Vac-u-Gun Systems

The Model 6094 is the Deep Hole Vac-u-Gun only.

The Model 6194 comes with a reusable bag and clamp for debris collection.

The Model 6394 comes with the reusable bag and a 10′ (3m) section of vacuum hose for transferring the debris to a collection point.

If you have questions about the Deep Hole Vac-u-Gun or any of the 16 different EXAIR Intelligent Compressed Air® Product lines, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

 

 

Threaded Line Vacs: Low Cost Conveyor Uses Ordinary Pipe!

EXAIR’s Threaded Line Vac air operated conveyor takes an ordinary pipe and converts it into a powerful conveying system.  A fast, low cost way to convey items such as pellets, scrap trim, bulk solids, chips, paper, small parts, sawdust, granules, and so much more. The Threaded Line Vac attached easily to plumbing pipe couplers, like PVC or iron, making it easy to build a complete system with parts readily available from your local supply house or hardware store.

The Threaded Line Vac are ideally suited for conveying large volumes of materials over long distances.  Like the standard, smooth bore ended Line Vacs, the unit works by ejecting a small amount of compressed air to produce a vacuum suction on the inlet side and a high output flow from the outlet side.  By using a pressure regulator to control the compressed air supply pressure, the rate of conveyance can be controlled to match the application needs, while minimizing the compressed air usage.

3inTrLVbckls_prHR1670x574

Models are available from 3/8 NPT to 3 NPT with materials of construction of aluminum and types 313 and 316 stainless steels (excellent corrosion resistance.)  High temperature versions of the stainless steel Threaded Line Vacs are available as well, for temperatures up to 900°F.

For those processes requiring the highest rates of conveyance over the longest distances and/or the most abrasive of materials, the Heavy Duty Threaded Line Vac is the right choice.  Designed with the most rugged industrial processes and applications in mind, the special hardened alloy construction helps prevent premature wear that could occur with standard aluminum or stainless steel models, under the harshest of conditions.  The performance has been boosted, to be able to convey more material, over longer distances and higher vertical rises.

HDLV

To select the right model, information regarding these criteria is helpful-

  • Size of parts and bulk density of material being conveyed
  • What size hose, tube, or pipe is desired
  • Target conveyance rate
  • Distance of conveyance, both horizontal and vertical legs
  • Preferred material of construction

For another look, please see the video available that provides more details about the Line Vac family.

If you would like to talk about Line Vacs or any of the EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

Coast to Coast and Beyond

Recently, I was working with  a customer looking for a Premium Reversible Drum Vac and wanted it shipped to the Northwest Territories of Canada –  which we could do!  It got me to thinking, what are the farthest US state and territory locations EXAIR has shipped to in the North, South, West and East directions.  I ‘scoured’ the records and came up with these.

Furthest North- We have shipped to Prudhoe Bay, Alaska.  Most recently, believe it or not, we shipped a NEMA 4X Cabinet Cooler to an Oil and Natural Gas Exploration Company.  Goes to show that even the coldest environments still have the need to provide cool, clean, dry air to cool and protect electronics in electrical enclosures.

Furthest South – We have shipped to the US Territory of Puerto Rico, city of Santa Isabel.  An Aerospace company needed a strong, laminar blast of air and utilized a 6″ Stainless Steel Air Knife.  An Air Knife offers a quiet, efficient way to clean, dry or cool parts, webs, or conveyors.

Furthest West- We have shipped to the US Territory of Guam.  The local University ordered a model 1111-4 Super Air Nozzle Cluster, for a good strong blast of air flow for a cleaning operation.  The model 1111-4 delivers 3.2 lbs of force, at just 82 dBA of sound. A safe and efficient nozzle for blowoff operations.

Furthest East- We have shipped to Eastport, Maine.  The customer in Eastport ordered a Line Vac and a section of Conveyance Hose.  The Line Vac is a great tool for conveying large volumes of material over long distances, through a standard hose or tube.  The compact design features large throat diameters for maximum throughput capability.

 

It was interesting to look back and see all the places that EXAIR has shipped.  We have customers from all over the globe. If you are outside the of 50 US States and Canada, we have a dedicated team of International Application Engineers that will work with you to select the best EXAIR product for your process and application, and direct you to your local International Distributor.

If you would like to talk about any of the EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

E-Vac Vacuum Generators- For More Than Just Pick and Place

A textbook application for vacuum generators is the ‘pick and place’ function.  With ever increasing automation and robotic cells, more and more opportunities present themselves to utilize the E-Vac Vacuum Generator as a part of the system to ‘pick up’ an object and ‘place’ it in a new position. But the E-Vac’s can be used for many more types of applications.

evac_models (2)
In-Line E-Vac

Another popular usage is to hold something in place. One of our customers uses an array of Adjustable E-Vacs to pull a vacuum and hold down various sizes of Styrofoam sheets during a machining operation. The previous system was a 1 hp blower type, and did not offer any flexibility for handling different size sheets. Sheets would slip and produce off quality results. After installing the new design, the system was able to handle any size sheet, and scrap levels went down dramatically.

adjustable_evacs (2)
Adjustable E-Vac

A unique implication that was solved with an E-Vac was to deflate sporting balls.  The customer printed custom logos, and preferred the items to be flat for the printing operation. Using a commercial grade electric shop vac didn’t completely deflate the balls, and motors burned out often.  Using a low vacuum In-Line E-Vac with a quiet Straight Through Muffler, the customer can now quickly and quietly, fully deflate the balls.

Another popular use for the E-Vac is to pull a vacuum for drawing up liquids or gases. A customer that manufactures automotive seats was having issues with the process, where the expanding foam was producing a gas, and the gas would produce pockets and voids in the foam after setting.  The customer used a model 800017 In-Line E-Vac to create a vacuum inside the mold and draw off the gas, eliminating the pockets and the voids in the final product.

Lastly, as I am big fan of recycling, anything and everything, we worked with a customer that recycles the old CRT style of computer monitor  (remember those?) The housing would be sawed in half, so that access to the internal components could be made. Because of the variability in the size and shape of the monitors, the customer was using an adjustable chuck system, which took time to set-up for every monitor, each being a bit different. To speed up the process, an EXAIR In-Line E-Vac and 5″ Suction Cup was implemented, and the monitor held in place by the screen, which was was very consistent in shape from monitor to monitor. This change reduced the set-up time required.

These and other Applications for the E-VACs and all other EXAIR products can be found on the EXAIR website on the Products page, under the Related Info section toward the bottom of each page.

If you have questions regarding E-Vac Vacuum Generators or any EXAIR Intelligent Compressed Air® Product, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB