New to EXAIR’s line of Liquid Atomizing Nozzles are the FullStream Liquid Only Atomizing Nozzles. This family of nozzles does not require any source of compressed air to operate, just a supply of pressurized liquid.
They produce droplets by spinning the liquid and breaking its surface tension through a precise orifice or by impacting the liquid onto the surface of the nozzle. Compared to EXAIR’s Air Atomizing Spray Nozzles, these nozzles generate more liquid volume and produce a coarser spray pattern. This higher liquid volume is beneficial for industrial applications including cleaning, cooling, rinsing, dust suppression, and washing. Constructed of Type 303 stainless steel, these durable and rugged nozzles are ideal for industrial applications. They’re available in three sizes: ¼ NPT, 3/8 NPT, and ½ NPT these nozzles can achieve flowrates ranging from 0.5 GPM to 17.64 GPM.
This style of nozzle is a good fit for general-purpose applications in industry and will commonly be used to spray inexpensive liquids such as water, rinse aids, or detergents. They’re also effective for spraying a variety of chemicals, pesticides, and herbicides.
Adjustments to the nozzle’s liquid flow rate can be achieved by regulating the liquid pressure supplied to the nozzles. As we increase the liquid pressure, the flow through the nozzle will increase. As the pressure increases, not only do we increase the overall liquid flow rate but also the size of the spray pattern. If a tight tolerance in liquid flowrate is needed, the Air Atomizing Nozzles will provide more precise control over the application of fluids.
The FullStream Cone Nozzles produce a full cone spray pattern and are among the most common style of spray nozzle available on the market today. They produce a uniform distribution of liquid in a cone shaped round pattern. Their tangential flow is vaneless, creating open internal features that are resistant to clogging for liquids with suspended particles.
The nozzles are manufactured out of Type 303 stainless steel for durable and rugged applications up to a maximum temperature of 800°F. With absolutely no moving parts, these nozzles are Built to Last. All sizes are available in stock to ship today with an order in by 2:00 EDT.
Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD