Recently, I was working with a customer that has purchased several of the EXAIR Atomizing Spray Nozzles, specifically the model Aw5020SS. The customer had another project coming up and needed two more nozzles. I inquired about the application and we discussed at length the way the nozzles are being used.
When a concrete road is being poured, several sample forms are poured during the process. The local Department of Transportation takes the samples and cures them in a wet room for 30 days, and then performs tensile testing, to confirm the concrete meets the strength requirements. The wet room must be kept at 23°C (73.4°F) and 100% Humidity during this time frame. The EXAIR model AW5020SS Atomizing Nozzles are used to provide the moisture that ensures the room humidity conditions are met and maintained. Because the droplets are very fine, the effect of a fog is achieved, with the water droplets suspended in the air, keeping the humidity at 100%.
Atomizing spray nozzles are capable of producing very fine droplet sizes. A typical rain drop is 6000 microns in diameter, standard liquid nozzles produce droplets ranging from 300-4000 microns. The EXAIR Atomizing Nozzles produce droplets from 20-100 microns!
Droplet sizes can be adjusted by varying either the liquid pressure or air pressure. Increasing the air or decreasing the liquid pressure will generally produce a smaller droplet size.
EXAIR manufactures (3) types of Atomizing Nozzles – Internal Mix, External Mix, and Siphon Fed, in both 1/4 NPT and 1/2 NPT sizes. Maximum liquid viscosity is 800 cP. Flow rates range from 0.6 GPH up to 303 GPH, so we’ll be able to find one that meets your flow requirements.
To discuss your application and how an EXAIR Atomizing Nozzle can benefit your process, feel free to contact EXAIR and myself or one of our other Application Engineers can help you determine the best solution.