Tube Maker Cleans Surface to Improve Ink Jet Marking

Customer manufactures seemless metal tubing in various sizes. After sizing, tube is washed, rinsed, dried and labeled with ink jet printing system.  Problem was the tubing was not being dried well enough by original blowing system which was a simple copper tube aimed at only one part of the tube circumference.

Customer moved to use Model 2402 2″ Super Air Wipe to blow the entire tube off prior to printing. Tube was completely dry and print job came out nicely. Customer was completely happy as they were able to get a much dryer product using less air than they did previously.

This is a very straight forward application where using compressed air more efficiently and effectively, using EXAIR product, produces superb results in final product quality.

Neal Raker
Application Engineer
nealraker@exair.com

Leave a Reply