Line Vac Solution For Fiberglass Application

150200

Recently, I worked through a project with an end user in the UAE in need of a more viable material transfer system. As a manufacturer of fiberglass liners, they developed a need to convey a mixture with properties similar to cement approximately 10’ vertically. At the end of this conveying distance is a hopper, situated atop a machine used to mix the compound needed for production.

Presently the material is transferred from a small storage silo to the hopper by hand, but such a setup has proven to be insufficient and time consuming. After working with the end user to determine the bulk density of the material and the required conveyance rate, it became apparent that a single Line Vac would not have sufficient transfer capabilities to keep up with the demand. However, if two Line Vacs could be run in parallel, our solution became much more feasible.

By installing two 150200 Line Vacs to move the material, the end user is expecting to meet the needs of production, and to transfer the material into the hopper at a more productive and efficient rate. In this application the need is for non-continuous material transfer at a high rate, so the parallel Heavy Duty Line Vacs provided a perfect solution.

EXAIR products and staff are in place to provide solutions. If you have an application problem, contact an EXAIR Application Engineer.

Lee Evans
Application Engineer
LeeEvans@EXAIR.com
@EXARI_LE

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s