Have you ever walked through a facility and looked up? Most facilities have compressed air lines, electrical conduits, HVAC duct work, lighting ballast, beams, sprinkler systems, etc. located near the ceiling. Can you imagine the amount of dirt and debris that has been collecting up there? I received a phone call from a food processing plant. They knew the necessity in keeping the entire area clean, even above their equipment. They contacted me for help in trying to remove the dirt and debris from above all the structures near the ceiling.
I suggested the model 1330-72 Heavy Duty Safety Air Gun with a 72” (1829mm) extension. I also suggested a model 9053 swivel fitting to help angle the 2” (51mm) Flat Super Air Nozzle, installed at the end of the extension. The customer would use a scissor lift to reach close to the ceiling and with the 72” (1829mm) extension, they could reach all the hard-to-get areas. The 2” (51mm) Flat Super Air Nozzle would cover a larger area above HVAC duct work and racks of pipe and conduit. When you add the model 9053 swivel fitting, it will help in directing the force of the compressed air at the top surfaces of your target. Adding the Heavy Duty Safety Air Gun to this assembly, it makes a very reliable, durable system that can handle the banging and bumping in this application.
Dirt and dust can get everywhere, and EXAIR can help to remove it. We carry a variety of Safety Air Guns, Super Air Nozzles, and lengths of extension pipes. If you cannot reach it, give us a call and ask one of our Application Engineers for help.