EXAIR’s In-Line and Adjustable E-Vacs are powerful compressed air powered vacuum generators. They’re a low-cost way to create a vacuum for a variety of different applications: pick and place, clamping, chucking, lifting, surface mounting, and vacuum forming are just some of the possibilities. Both the In-Line and Adjustable E-Vacs are available in a variety of different sizes and flows and can accommodate a wide range of applications.
In addition to the vacuum generators themselves, EXAIR offers a variety of different accessories to help you build a complete system. To minimize the sound level and ensure you’re adhering to OSHA 29CFR 1910.95, we have Standard Mufflers as well as Straight Through Mufflers. The Straight Through Mufflers offer the best level of sound reduction, up to 26 dBA!!

With no moving parts to wear out, EXAIR’s E-Vacs are virtually maintenance free when supplied with clean, dry compressed air. To maintain proper operation of your E-Vac, installation of an Automatic Drain Filter to remove any particulate and moisture from the air supply is necessary. In addition, oil removal filters are also available if your compressed air supply contains any oil as is common in many compressed air systems.
For pick and place or lifting applications, vacuum cups will be necessary. With a wide variety of different vacuum cups available: small round, large round, oval, and bellows, we can accommodate nearly any size or shape material. For heavier materials, round cups with cleats provide rigidity and ensure that the load remains stable. For applications on textured or uneven surfaces, bellows style cups have convolutions that allow for the cup to quickly decompress when it touches the surface of an uneven part or material.

The vacuum port of the E-Vac has an NPT thread, vacuum cups can be installed directly in this inlet. For applications where the vacuum cup(s) are remotely located, we offer polyurethane vacuum tubing as well as a variety of different fittings to connect them. Both 1/4” and 3/8” O.D. sizes are available in 10’ lengths up to 50’. Simply indicate the model number of the tubing and add the length with a “-“ at the suffix. For example, a 900795-30 would be 30′ of 1/4″ O.D. tubing. In addition to fittings and tubing, vacuum check valves are also available. These can be beneficial if there is potential for fluctuations in the compressed air pressure or supply. In the event that there is a significant drop in pressure or loss of compressed air supply, the check valve will ensure that the load remains held.

With all of the different options making a selection can seem like a daunting task. A highly trained EXAIR Application Engineer is ready and available to help you!! With just a few quick details, we can help advise you about the proper size E-Vac generator for your application as well as recommend the most suitable cup and accessories. Give us a call, shoot us an e-mail, or reach out to us online via chat and we’ll make sure you have a complete vacuum solution ASAP with all parts ready to ship from stock!
Tyler Daniel
Application Engineer
E-mail: TylerDaniel@Exair.com
Twitter: @EXAIR_TD