EXAIR Hoses and Tubes are Great Accessories

EXAIR offers different styles of hoses and tubes as accessories to our product lines.  They are built and designed to easily fit with our products as well as being sized correctly to not affect performance.  It simplifies the use, setup, and integration of EXAIR products in your facility.   You do not have to determine the proper diameters, pressure ratings, or end fittings to best fit the EXAIR products to maximize their performance.  Also, having these items available from one source minimizes the number of purchases and vendors necessary for a complete and working solution. In this article, I will go over the different hoses and tubes that EXAIR can provide.

Conveying Hoses:

The hoses above are used with our Air Operated Conveyors or Line Vacs.  The Line Vacs are designed to move product from point A to point B.  If the Line Vac is the “vehicle”, the Conveyance Hose is the track.  The hoses are made of a durable PVC semi-flexible hose with 6 different diameters from ¾” I.D. to 3” I.D.  The conveyance hose can slip easily onto the EXAIR non-threaded style of Line Vacs.  EXAIR can cut-to-length Conveying Hoses up to 50 feet (15m); in increments of 10 feet (3m).

Coiled Hoses:

To get compressed air from the piping system to the Safety Air Guns, we offer a series of Coiled Hoses.  They are made of a durable abrasion-resistant nylon material that is 12 feet long (3.6 meters).  They have swivel fittings to allow for easy uncoiling, and a spring strain relief to keep the hose from kinking.  The coiled design makes it easy to reach around the work area and retract back to the substation.  This will help to keep the hose off the ground where potential dangers could occur.  We offer 3 different connection sizes of 1/8” NPT, ¼” NPT, and 3/8” NPT to attach right to the Safety Air Guns.  With the proper size, the Coiled Hoses can supply the required amount of compressed air with a minimal amount of pressure drop.

Compressed Air Hoses:

If you need a compressed air line to reach from overhead or around equipment, the EXAIR Compressed Air Hoses would work with these applications.  They are made from a reinforced synthetic rubber in 3/8” I.D. and 1/2” I.D. diameters.  We can make specific lengths up to 50 feet (15m).  They are rated for 250 PSIG (17 bar) air pressure, and the hose material works well for long lasting protection against ozone, weathering and temperatures up to 158oF (70oC).  They come with two male ends in ¼” NPT or ½” NPT.

Stay Set Hoses:

The Stay Set Hose gives you that possibility of manually adjusting or re-adjusting Super Air Nozzles.  The hose has a “memory” function, and it will not creep or droop until you physically move it.  They work well to direct air flows in specific target areas.  They can be used with Super Air Nozzles, Safety Air Guns and Blow-off Kits.  The Stay Set Hoses come in lengths from 6” (15cm) to 36” (91cm), and they are offered with ¼” NPT male on both ends or with a 1/8” NPT female and a ¼” NPT male connections.  These hoses are rated for 250 PSIG (17 bar) and are made from reinforced synthetic rubber.  If positioning is required for accurate blowing or re positioning for different areas, the Stay Set Hose would be a nice addition to your equipment.

Vacuum Tubing:

For our E-Vac product line, EXAIR offers vacuum hoses to connect the E-Vac vacuum generators to the suction cups.  They are made from polyurethane in ¼” O.D. and 3/8” O.D.  The tubing is very flexible for moving product, and they can resist the vacuum pressures created by the E-Vac.  They slip easily into our Push-In Connectors to quickly attach vacuum cups to the E-Vac system.  EXAIR can sell both types of tubing up to 50 feet (15m) in increments of 10 feet (3m).

Hoses and tubes may seem like simple things, but EXAIR already did all the research in determining the best material and correct size for optimum performance.  You can leverage this information to save you time and money when using EXAIR products in your application.  If you need help in selecting the correct model, you can contact an Application Engineer.  We will be happy to help you.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

EXAIR’s E-Vac Vacuum Generators & Accessories

vcacc

EXAIR’s In-Line and Adjustable E-Vacs are powerful compressed air powered vacuum generators. They’re a low-cost way to create a vacuum for a variety of different applications: pick and place, clamping, chucking, lifting, surface mounting, and vacuum forming are just some of the possibilities. Both the In-Line and Adjustable E-Vacs are available in a variety of different sizes and flows and can accommodate a wide range of applications.

In addition to the vacuum generators themselves, EXAIR offers a variety of different accessories to help you build a complete system. To minimize the sound level and ensure you’re adhering to OSHA 29CFR 1910.95, we have Standard Mufflers as well as Straight Through Mufflers. The Straight Through Mufflers offer the best level of sound reduction, up to 26 dBA!!

890001
Straight through mufflers are available from 1/4″-1″ MNPS

With no moving parts to wear out, EXAIR’s E-Vacs are virtually maintenance free when supplied with clean, dry compressed air. To maintain proper operation of your E-Vac, installation of an Automatic Drain Filter to remove any particulate and moisture from the air supply is necessary. In addition, oil removal filters are also available if your compressed air supply contains any oil as is common in many compressed air systems.

For pick and place or lifting applications, vacuum cups will be necessary. With a wide variety of different vacuum cups available: small round, large round, oval, and bellows, we can accommodate nearly any size or shape material. For heavier materials, round cups with cleats provide rigidity and ensure that the load remains stable. For applications on textured or uneven surfaces, bellows style cups have convolutions that allow for the cup to quickly decompress when it touches the surface of an uneven part or material.

vacupfam
EXAIR’s family of vacuum cups

The vacuum port of the E-Vac has an NPT thread, vacuum cups can be installed directly in this inlet. For applications where the vacuum cup(s) are remotely located, we offer polyurethane vacuum tubing as well as a variety of different fittings to connect them. Both 1/4” and 3/8” O.D. sizes are available in 10’ lengths up to 50’. Simply indicate the model number of the tubing and add the length with a “-“ at the suffix. For example, a 900795-30 would be 30′ of 1/4″ O.D. tubing. In addition to fittings and tubing, vacuum check valves are also available. These can be beneficial if there is potential for fluctuations in the compressed air pressure or supply. In the event that there is a significant drop in pressure or loss of compressed air supply, the check valve will ensure that the load remains held.

push_lock_t
Push-in Swivel Tee Connector

With all of the different options making a selection can seem like a daunting task. A highly trained EXAIR Application Engineer is ready and available to help you!! With just a few quick details, we can help advise you about the proper size E-Vac generator for your application as well as recommend the most suitable cup and accessories. Give us a call, shoot us an e-mail, or reach out to us online via chat and we’ll make sure you have a complete vacuum solution ASAP with all parts ready to ship from stock!

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@Exair.com
Twitter: @EXAIR_TD