Are EXAIR’s Hoses and Tubes Right For You?

Are you tired of ducking and dodging hard pipe everywhere? Do you need something more mobile for your compressed air? Then EXAIR Hoses and Tubes might be a solution for you. EXAIR offers a variety of hoses and tubes in different styles designed to work with our products without affecting performance. These products simplify the use, setup, and integration of our various products into your process. Normally if you were to buy hoses you would need to determine the proper diameters, pressure ratings, and/or end fittings to best fit the item in use. This is all unnecessary when purchasing EXAIR’s Hoses and tubes for EXAIR products since everything is sized and properly rated to be used with our products. So, ask our Application Engineers if EXAIR Hoses and Tubes are right for you.

 Products may include the following.

Line Vac air operated conveyor hose
Conveying Hoses:

These hoses are used with our Air Operated Conveyors or Line Vacs which are used to convey material from point A to point B. The hose can be mounted on either side of the Line Vac using the properly sized hose clamp that comes with it. The Conveyance hose is made out of a durable PVC semi-flexible material in sizes from ¾” I.D. to 3” I.D. to match our Line Vac sizes. They also come in lengths up to 50’ in increments of 10’.

Coiled hose
Coiled Hoses:

When it comes to getting compressed air to our safety air guns, we offer a series of abrasion-resistant nylon Coiled Hoses. The coiled hose comes in a 12’ long length and comes in 3 sizes; these sizes are 1/8” NPT, ¼” NPT, and 3/8” NPT to attach right to EXAIR’s Safety Air Guns. The hoses also include swivel fittings to make for easier uncoiling. The coiled design makes it easy to reach around the work area and retract back to the substation. With the right size hose Coiled Hoses can supply the required amount of compressed air with minimal amount of pressure drop.

Compressed air hose
Compressed Air Hoses:

Compressed Air Hose can be used to reach equipment from overhead or near equipment. These hoses are made with synthetic rubber and comes in 3/8” I.D. and ½” I.D… Lengths up to 50’ long can be provided and the hoses are rated for up to 250 psig air pressure. These hoses can provide lasting protection from ozone, weathering and temperatures up to 158oF. They also come with two male ends in ¼” NPT or ½” NPT.

Stay Set Hoses
Stay Set Hoses:

Bendable and flexible, the stay set hose allows for manual positioning of your compressed air product. Equipped with “memory” function, the hose will not creep or droop until it is physically moved. The Stay Set Hose comes in lengths from 6” to 36” in length, and they offered in a combination of 1/8” and ¼” MNPT connections. These hoses are rated for 250 psig and are made of a reinforced rubber.

E-Vac Tubing

Vacuum Tubing:

When it comes down to our E-Vac product line, EXAIR offers vacuum tubing to be used along with the unit. This tubing is made from polyurethane and comes in 1/8” O.D. and 3/8” O.D. up to 50’ in length in increments of 10’.

If you have any questions about compressed air systems or want more information on any of EXAIR’s products, give us a call, we have a team of Application Engineers ready to answer your questions and recommend a solution for your applications.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

EXAIR Hoses and Tubes are Great Accessories

EXAIR offers different styles of hoses and tubes as accessories to our product lines.  They are built and designed to easily fit with our products as well as being sized correctly to not affect performance.  It simplifies the use, setup, and integration of EXAIR products in your facility.   You do not have to determine the proper diameters, pressure ratings, or end fittings to best fit the EXAIR products to maximize their performance.  Also, having these items available from one source minimizes the number of purchases and vendors necessary for a complete and working solution. In this article, I will go over the different hoses and tubes that EXAIR can provide.

Conveying Hoses:

The hoses above are used with our Air Operated Conveyors or Line Vacs.  The Line Vacs are designed to move product from point A to point B.  If the Line Vac is the “vehicle”, the Conveyance Hose is the track.  The hoses are made of a durable PVC semi-flexible hose with 6 different diameters from ¾” I.D. to 3” I.D.  The conveyance hose can slip easily onto the EXAIR non-threaded style of Line Vacs.  EXAIR can cut-to-length Conveying Hoses up to 50 feet (15m); in increments of 10 feet (3m).

Coiled Hoses:

To get compressed air from the piping system to the Safety Air Guns, we offer a series of Coiled Hoses.  They are made of a durable abrasion-resistant nylon material that is 12 feet long (3.6 meters).  They have swivel fittings to allow for easy uncoiling, and a spring strain relief to keep the hose from kinking.  The coiled design makes it easy to reach around the work area and retract back to the substation.  This will help to keep the hose off the ground where potential dangers could occur.  We offer 3 different connection sizes of 1/8” NPT, ¼” NPT, and 3/8” NPT to attach right to the Safety Air Guns.  With the proper size, the Coiled Hoses can supply the required amount of compressed air with a minimal amount of pressure drop.

Compressed Air Hoses:

If you need a compressed air line to reach from overhead or around equipment, the EXAIR Compressed Air Hoses would work with these applications.  They are made from a reinforced synthetic rubber in 3/8” I.D. and 1/2” I.D. diameters.  We can make specific lengths up to 50 feet (15m).  They are rated for 250 PSIG (17 bar) air pressure, and the hose material works well for long lasting protection against ozone, weathering and temperatures up to 158oF (70oC).  They come with two male ends in ¼” NPT or ½” NPT.

Stay Set Hoses:

The Stay Set Hose gives you that possibility of manually adjusting or re-adjusting Super Air Nozzles.  The hose has a “memory” function, and it will not creep or droop until you physically move it.  They work well to direct air flows in specific target areas.  They can be used with Super Air Nozzles, Safety Air Guns and Blow-off Kits.  The Stay Set Hoses come in lengths from 6” (15cm) to 36” (91cm), and they are offered with ¼” NPT male on both ends or with a 1/8” NPT female and a ¼” NPT male connections.  These hoses are rated for 250 PSIG (17 bar) and are made from reinforced synthetic rubber.  If positioning is required for accurate blowing or re positioning for different areas, the Stay Set Hose would be a nice addition to your equipment.

Vacuum Tubing:

For our E-Vac product line, EXAIR offers vacuum hoses to connect the E-Vac vacuum generators to the suction cups.  They are made from polyurethane in ¼” O.D. and 3/8” O.D.  The tubing is very flexible for moving product, and they can resist the vacuum pressures created by the E-Vac.  They slip easily into our Push-In Connectors to quickly attach vacuum cups to the E-Vac system.  EXAIR can sell both types of tubing up to 50 feet (15m) in increments of 10 feet (3m).

Hoses and tubes may seem like simple things, but EXAIR already did all the research in determining the best material and correct size for optimum performance.  You can leverage this information to save you time and money when using EXAIR products in your application.  If you need help in selecting the correct model, you can contact an Application Engineer.  We will be happy to help you.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

EXAIR Accessories – We’ve Got you Covered

When you work with us here at EXAIR, we strive to have all the ancillary items that you might need to make your installation a success, without having to find components at the last minute or perhaps using the wrong sized components. Each specific product line such as Super Air Knives or Line Vac air operated conveyors have specific accessories such as mounting brackets or plumbing kits which EXAIR has made to simplify the installation of those particular products. We also carry generalized accessories which work across all of the product lines so you do not have to use multiple vendors or purchase orders.

Silencing Mufflers – Per OSHA Standard 1910.95(a), a worker must not be exposed to sounds levels above 90 dBA for any eight hour shift of a 40 hour work week.  EXAIR offers several types of mufflers including – Reclassifying, Sintered Bronze, Straight-Through and Heavy Duty.  For reducing the noise associated with an EXAIR E-Vac Generator, Vortex Tube, Cabinet Cooler System, or the exhaust air from cylinders, valves and other air powered equipment, we’ve got a muffler that will help to keep the noise level at an acceptable level.

Mufflers

Solenoid and Manual Valves – The easiest way to reduce compressed air usage and save on operating expense is to turn off the compressed air to a device when it isn’t needed. EXAIR carries a wide assortment of solenoid valves, with offerings in the NEMA 4/4X classification, and supply voltages of 24VDC, 120VAC, and 240VAC.  We also have manual ball valves from 1/4 NPT to 1-1/4 NPT and a foot operated valve, with 1/4 NPT connections.

Valves

Swivel Fittings, Stay Set Hoses and Magnetic Bases – To provide a great degree of flexibility for positioning an EXAIR Super Air Nozzle, Air Jets or Air Amplifiers, EXAIR offers several items.  The Swivel Fittings have 25 degree of movement from the center axis, providing a total of 50 degree of adjustability.  The position is locked in place and holds until adjustment is needed. For applications where frequent re-positioning of the air device is required, the Stay Set Hoses are ideal.  Simply mount the hose close to the application, bend it to the shape preferred, and because the hose has “memory”, it will not creep or bend.  Lastly, the Magnetic Bases are another option for flexible, movable installations.  The base has a on/off valve, and a powerful magnet to hold in any vertical or horizontal mounting arrangement.

Swivels, StaySets,MagBases2

 

Hoses – EXAIR can provide hoses for your application.  For the Line Vac air operated conveyor applications, we offer conveyance hose – a durable, clear reinforced PVC hose, in diameters of 3/8″ to 3″ ID, and lengths up to 50′. On the compressed air side, we can provide 12′ Coiled Hoses with 1/8, 1/4, and 3/8 NPT connections, and also 3/8″ and 1/2″ ID hose in lengths to 50′.

Hoses

Filter Separators, Oil Removal Filters and Pressure Regulators – Perhaps the most important accessories for use on a compressed air device are filters and regulators. Filtering the compressed air of dirt, debris, moisture and oil will help to prevent build up inside the EXAIR products, leading to longer service life, and less time spent cleaning, while providing optimum performance. Regulating the air pressure allows for tuning of the performance, using the proper amount of compressed air to obtain satisfactory results.

Filter and Regualtors

If you have questions regarding accessories for use with any EXAIR Intelligent Compressed Air® Product, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB