Are you tired of ducking and dodging hard pipe everywhere? Do you need something more mobile for your compressed air? Then EXAIR Hoses and Tubes might be a solution for you. EXAIR offers a variety of hoses and tubes in different styles designed to work with our products without affecting performance. These products simplify the use, setup, and integration of our various products into your process. Normally if you were to buy hoses you would need to determine the proper diameters, pressure ratings, and/or end fittings to best fit the item in use. This is all unnecessary when purchasing EXAIR’s Hoses and tubes for EXAIR products since everything is sized and properly rated to be used with our products. So, ask our Application Engineers if EXAIR Hoses and Tubes are right for you.
Products may include the following.
These hoses are used with our Air Operated Conveyors or Line Vacs which are used to convey material from point A to point B. The hose can be mounted on either side of the Line Vac using the properly sized hose clamp that comes with it. The Conveyance hose is made out of a durable PVC semi-flexible material in sizes from ¾” I.D. to 3” I.D. to match our Line Vac sizes. They also come in lengths up to 50’ in increments of 10’.
When it comes to getting compressed air to our safety air guns, we offer a series of abrasion-resistant nylon Coiled Hoses. The coiled hose comes in a 12’ long length and comes in 3 sizes; these sizes are 1/8” NPT, ¼” NPT, and 3/8” NPT to attach right to EXAIR’s Safety Air Guns. The hoses also include swivel fittings to make for easier uncoiling. The coiled design makes it easy to reach around the work area and retract back to the substation. With the right size hose Coiled Hoses can supply the required amount of compressed air with minimal amount of pressure drop.
Compressed Air Hose can be used to reach equipment from overhead or near equipment. These hoses are made with synthetic rubber and comes in 3/8” I.D. and ½” I.D… Lengths up to 50’ long can be provided and the hoses are rated for up to 250 psig air pressure. These hoses can provide lasting protection from ozone, weathering and temperatures up to 158oF. They also come with two male ends in ¼” NPT or ½” NPT.
Bendable and flexible, the stay set hose allows for manual positioning of your compressed air product. Equipped with “memory” function, the hose will not creep or droop until it is physically moved. The Stay Set Hose comes in lengths from 6” to 36” in length, and they offered in a combination of 1/8” and ¼” MNPT connections. These hoses are rated for 250 psig and are made of a reinforced rubber.
When it comes down to our E-Vac product line, EXAIR offers vacuum tubing to be used along with the unit. This tubing is made from polyurethane and comes in 1/8” O.D. and 3/8” O.D. up to 50’ in length in increments of 10’.
If you have any questions about compressed air systems or want more information on any of EXAIR’s products, give us a call, we have a team of Application Engineers ready to answer your questions and recommend a solution for your applications.