EXAIR’s Line Vacs are an ideal solution for bulk conveying over long distances. With just a small amount of compressed air, the Line Vac generates vacuum on one end and high output flows on the other. The conveyance rate is easily adjustable by regulating the pressure supplied to the Line Vac. At higher input pressures the Line Vac will move more material, at lesser pressures the conveyance rate is also reduced.
The Heavy Duty Line Vac looks similar to the standard Line Vac, but packs a more powerful punch. Performance has been boosted with larger holes in the generator. This makes the Heavy Duty Line Vac ideal for heavier materials that must be conveyed over longer vertical and horizontal distances. Standard Line Vacs can also be drilled out to match the performance of a Heavy Duty. In addition to being a more powerful conveying system, the Heavy Duty Line Vac is also constructed of our proprietary hardened alloy steel blend. This material provides exceptionally strong abrasion resistance for applications requiring the transfer of materials such as crushed glass, steel shot, or dry sand.
Where a material such as aluminum or even stainless steel would quickly wear out, the Heavy Duty Line Vac will not. As with all of our stock products, the Heavy Duty Line Vac comes with EXAIR’s Built-To-Last 5 year warranty. We’ve tested these units here ourselves with a variety of different common abrasive materials. Check out the video below to see for yourself just how durable these Line Vacs are!
Just as the Standard Line Vacs, the Heavy Duty Line Vac can come with either smooth of NPT threaded connections to turn ordinary pipe into a powerful conveying system. With sizes from ¾ NPT up to 3” NPT, there’s a size from stock available suitable for your application. If you’re looking to move abrasive materials from one point to another in your shop, look no further than EXAIR’s Heavy Duty Line Vac. Reach out to an EXAIR Application Engineer for help in determining the most suitable sized Line Vac for your requirement.