EXAIR’s Line Vacs are the ideal low-cost solution for bulk material transfer or trim and scrap removal. Available with NPT threaded connections, EXAIR’s Threaded Line Vacs allow you to convert ordinary pipe into a powerful conveying system for parts, scrap, trim, and other bulk materials. With performance identical to that of the Standard Line Vac, the Threaded Line Vac is available in sizes ranging from as small as 3/8 NPT and up to 3” NPT. There’s a suitable Line Vac for most standard sized NPT pipe common in any industrial facility.
The Threaded Line Vac is available in a range of different materials: Aluminum, Type 303 Stainless Steel, Type 316 Stainless Steel, and as a Heavy Duty conveyor constructed of a hardened alloy steel for use in abrasive applications. Where most materials or hard anodized coatings wear out or wear off over time, the Heavy Duty Line Vac is the ideal solution for heavy and abrasive materials. In addition to being abrasive resistant, the Heavy Duty Line Vac is also more powerful and suitable for longer vertical and horizontal transfer distances.
Each style of Threaded Line Vac is also available as a High Temperature option. By replacing the traditional o-rings with graphite seals, we’re able to provide a solution capable of withstanding temperatures up to 900°F!!!
The conveyance rate through the Line Vac is infinitely adjustable by regulating the air pressure supplied to it. At lower pressures, the conveyance rate (and air consumption) will decrease. At higher pressures, the conveyance rate will increase. If you have a Threaded Line Vac with the standard performance but need just a little bit more, the option also exists for a High Power unit that would match the performance of the similarly sized Heavy Duty. This can be ordered from the factory with an “HP” prefix, or modified yourself. Check out our video to see just how simple it is to get more out of your Threaded Line Vac.
With all sizes and materials on the shelf and in stock, we’re able to get a solution out to you quickly. We’ll ship out the very same day for stock orders received by 2:00 ET. Backed by our Unconditional 30 Day Guarantee, you’re able to make sure it is the right solution for you before committing to keep it. If you have an application that could be better served with an in-line pneumatic conveyor, give us a call. We’ll be happy to help you determine the most suitable size for the application.
Tyler Daniel, CCASS
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD