Adjustable Spot Cooler Keeps Band Saw Blade Cool

flir image
Heat camera image of band saw blade heat

We run into interesting applications that require cooling all the time. Here’s an example of a spot cooling application for a tire cutting application that used a FLIR camera to show the heat generated within the band saw blade.

The customer is a world supplier of tires for various vehicles from ATV to construction use. And they have a need to cut tires up for quality control testing as well as R&D purposes. They were looking for a low cost and efficient way to cool the blade without using liquid coolant or water as those methods require implementation of waste handling schemes that this customer did not want to deal with. So, they came to EXAIR as they knew we specialized in cold air cooling products. Specifically, they had interest in model 3925 (Dual Point, Adjustable Spot Cooler System). The dual point hose kit would allow for even cooling on both sides of the band saw blade. After discussing their application details, we agreed that model 3925 would be the best offering we could make to the customer. As we have a band saw in our workshop, I located some rubber material that we had with similar properties to a tire and made some quick tests to determine that in fact, model 3925 allowed for only a modest 5°C rise in temperature. The customer was quite satisfied at our test result and purchased 4 units for their band saws.

Neal Raker, International Sales Manager
nealraker@exair.com

@EXAIR_NR

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s