Mini Cooler, Spot Cooling for Small Parts and Processes

Over the years the basic vortex tube has been used in hundreds of industrial cooling applications. A few have become so popular as to warrant the development of an “applied product” designed to suit the specific application. These products include the Adjustable Spot Cooler, Mini Cooler, Cold Gun and Cabinet Coolers. All of these products can be found in our catalog and on our website.

The Mini Cooler™ is a proven way to reduce downtime and increase productivity on a variety of operations involving small parts where heat is a problem. It evolved out of the garment industry and is commonly used to cool needles and prevent breakage. EXAIR’s Mini Cooler produces a stream of 20°F (-7°C) cold air to prevent heat build-up. The Mini Cooler is particularly effective on high speed operations to prevent burning, melting and heat related breakage. Operation is quiet (76 dBA) and there are no moving parts to wear out.

The Mini Cooler incorporated a vortex tube to convert a small amount of compressed air into two low pressure streams, one moving within the other in opposite directions (see below). The two airstreams exchange heat, producing cold air from one end of the tube and hot air from the other. A flexible hose directs the cold airstream at the surface to be cooled.

The Mini Cooler produces instant cold air when compressed air is supplied to it. If less cold air is needed, the volume of cold air can be reduced by regulating the compressed air supply with the pressure regulator. Lower pressure give less cold flow and reduce compressed air consumption.

The Mini Cooler is an excellent spot cooler to prevent burning or breakage. If you have an application and have questions regarding which spot cooler is best for you please contact any of our Applications Engineers . EXAIR has the the expertise and products to provide solutions to your process problems.

Eric Kuhnash
Application Engineer
E-mail: EricKuhnash@exair.com
Twitter: Twitter: @EXAIR_EK

November’s Promo Features Cool Products

That’s right, with the start of November this year we also start our Cold Gun promotion. This promotion runs from the start of November until December 31, 2022. The best part is that Cold Guns have a long history of providing spot cooling solutions for industry. Cold Guns have been cooling product and processes for over 35 years! Take advantage of the current promotion today!

The EXAIR Cold Gun promo is a great way to receive an additional tool to extend the use of the Cold Gun. With the purchase of a promotional Cold Gun System w/ Single Point Hose Kit or promotional High Power Cold Gun System w/ Single Point Hose Kit you will receive a Dual Point Hose Kit for free. This is a $48.00 USD value. The Cold Gun will drop your compressed air temperature by 54°F when operating at 100 psig inlet pressure. Choose the standard point tip or the 1″ fan tip to blow the cold air. The total length of the flexible discharge hose is around 11″. If more coverage is needed, the promotional Dual Point Hose Kit gives around 5-6″ of straight hose before splitting into two smaller lines that offer both point or fan tip nozzles as well. This dual point can be used to reach both sides of larger diameter cutters and components that need a blast of cool air.

The Cold Gun is easily setup in any machine that has a ferrous metal surface thanks to its integrated magnetic base that will hold the unit in place even when the machine is moving or vibrating. If you do not have ferrous metal available for the magnetic base, using rigid piping or even something like u-bolts to hold the unit into place is a common practice of customers who need the cooling and know the Cold Gun will perform.

Lastly, if you aren’t certain whether the Cold Gun is the solution, we have an entire team of Application Engineers here to discuss the application, and it is also backed by our 30-day guarantee so our US and Canadian based customers can order one, test it in their facility for 30 days. If they are not pleased with the performance for any reason, the item can be returned to EXAIR. If you want to discuss your application, contact us today!

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

The Blog of all Blogs: A Quick Resource of Blogs that we Blogged

EXAIR started writing Blogs in 2008. Since then, we have written well over 2000 Blogs. There is a ton of information in our Blog section on the website. There is most likely a Blog or 10 written about nearly each one of our products. These are primarily written by application engineers that know a thing or two about our products. There are also many application Blogs, that may be very relatable to what you are doing. When you journey to our Blog page (or simply click Blog form EXAIR.com), simply type in a key word or two in our search bar. This search bar is located just below the first row of published Blogs on the right hand of the screen, here is a screenshot of that section (right). You can also choose to follow our blog here as well.

As application engineers, we get asked questions every day. Many of these questions are best answered in one (or more) of these 2000+ Blogs. Many times a picture or video can answer your questions much more precisely than a quick conversation or an email. Many times we will send you a blog link to help. Drawing from my own experience, and asking the other Application Engineers for their lists, I wanted to put our most referenced blogs in one helpful location. I’ve categorized these the best that I can, and hopefully this will be a useful resource for you today, and in the future.

OPTIMIZING YOUR COMPRESSED AIR SYSTEM

Six Steps to Optimizing Your Compressed Air System

This is one of the key sections to our blogs. One of our main goals is to help you optimize your system. Here are 6 blogs that go into detail on each of these key points:

  1. Six Steps to Optimization: Step 1 – Measure the Air Consumption
  2. Six Steps to Compressed Air Optimization: Step 2 – Find and Fix Leaks.
  3. Six Steps to Compressed Air Optimization: Step 3 – Use Efficient and Quiet Engineered Products
  4. Six Steps to Optimizing Compressed Air: Step 4, Turn it Off When Not in Use
  5. Installing Secondary Receiver Tanks: Step 5 in Optimizing Your Compressed Air System
  6. Six Steps to Optimization: Step 6 – Control the Air Pressure at the Point of Use to Minimize Air Consumption

INDUSTRIAL HOUSEKEEPING

This is a product line that has a lot of maintenance questions, probably because these products are used to clean up dirt, and where there is dirt, there can be problems, clogs and leaks:

One of the most common questions we have concerns the Reversible Drum Vacuum (RDV) refurbishment Blog. The RDV is used on the Reversible Drum Vac, and the Chip Trapper products. We offer a refurb service for a fee, but most of the time you can do this on your own by watching and following this blog: Cleaning the Reversible Drum Vac

The Chip Trapper has two very popular blogs as well: Finding and Fixing Chip Trapper Vacuum Leaks as well as Cleaning the Chip Trapper’s Directional Valve

CABINET COOLERS

  1. Calculating Heat loads for Cabinet Coolers
  2. Finding the correct internal temperature of your Electrical Cabinet – don’t use a temp gun
  3. Thermostat & Solenoid Valve
  4. How To Install An EXAIR NEMA 4 or 4X Cabinet Cooler® System
  5. EXAIR Side Mount Kits for NEMA Type 4-4X Cabinet Cooler® Systems
  6. Cold Air Distribution Kit Installation
  7. Installing A Dual Cabinet Cooler Hardware Kit
  8. How to identify your Cabinet Cooler

VORTEX TUBES

  1. Vortex Tubes for Dummies
  2. Adjusting the Vortex Tube
  3. Vortex Tube Cold Fraction – effects on flow and temperature
  4. Application: Creating Freeze Seals for water lines

SUPER AIR KNIVES

  1. Application: Bottle Drying with Super Air Knife (instead of blower)
  2. Application: Super Air Knives drying automotive parts
  3. How to position and mount your Air Knife
  4. Which Air Knife should you choose?
  5. Super Air Knife Plumbing Kits
  6. Maximizing Super Air Knives with Shims

LINE VACS / CONVEYOR SYSTEMS

  1. Why Line Vacs need ambient air
  2. How to drill out Line Vac Generator Holes for increased performance
  3. Application: Conveying Coffee Beans

AIR AMPLIFIERS

  1. Super Air Amplifier Ratios explained
  2. Air Amplifier vs Fan – for cooling
  3. Application: Super Air Amplifier evacuating smoke or fumes

AIR ATOMIZING SPRAY NOZZLES

  1. Choosing the right Atomizing nozzle
  2. No-Drip Nozzle repair video
  3. Atomizing Nozzle identification
  4. Application: Atomizing Spray nozzles and Gummy Bears

SAFETY AIR GUNS

  1. Putting the Safe in Safety Air Guns
  2. Safety Air Gun Accessories, Extensions, Chip Shields and more
  3. Chip Shield sizes and selections

GEN 4 STATIC ELIMINATORS

  1. Changing the Gen 4 Power Supply Fuse
  2. Replacing the rocker switch on a Gen 4 Power Supply
  3. Changing the high power cord on the Gen 4 Ion Air Cannon
  4. Application: Solving Static and Print quality in food packaging

E-VAC VACUUM GENERATORS

  1. How to build a custom E-Vac System
  2. Choosing the right size Vacuum Cups

ACCESSORIES – FILTERS AND REGULATORS

  1. Filter Separator and Pressure Regulator with coupling kit installation 
  2. Rebuilding an Automatic Drain Filter Separator 
  3. Overview of EXAIR accessories

CALCULATIONS AND MORE

  1. Calculating SCFM at any pressure
  2. ROI Calculations with EXAIR products
  3. Do you need a receiver tank?
  4. EXAIR’s Calculator Library
  5. EXAIR’s OSHA compliance

OPTIMZATION – EFC, FLOWMETERS, AND ULTRASONIK LEAK DETECTORS

  1. EFC – Application: Candy Company saves big money with EFC
  2. Flowmeter – How to install a Hot Tap Flowmeter
  3. Flowmeter – Moving and or using Block-Off rings

There are many more blogs and videos at your disposal. This is just a recap of many of our most used, most viewed and most helpful for the day-to-day conversations that happen here at EXAIR. If you have ideas for new blogs – we would love to hear that as well. Please feel free to reach out at any time for more information on any of our intelligent compressed air products.

Thank you for stopping by,

Brian Wages

Application Engineer

EXAIR Corporation
Visit us on the Web
Follow me on Twitter

Cover photo by clker-free-vector-image licensed by Pixabay

Bed Coffee and the Coanda Profile

Photo by Stocksnap and licensed by Pixabay

Every weekend my wife craves her “bed coffee”. I do my best to bring her some coffee in bed at least one, if not both weekend days. It makes her happy, and when she’s happy… The only thing I truly despise about this act of kindness is the actual pouring of the coffee. Now, I’m a decently smart guy but pouring this weekend coffee is a mess. Every time I end up with coffee on the counter, and many times on the mug. And when it gets on the mug it’s over, because it goes to the bottom of the mug and if I forget to wipe that off? Well, it gets on the sheets, because she inevitably rests her coffee on the sheets, and somehow this is my fault, and now she’s not happy anymore… (in fairness, she is still happy and just busts my chops about this part). But why does this happen to me?

It is a little refreshing to realize that I am just a victim of this scientific phenomenon called the Coanda profile. When I start to pour the coffee, the stream adheres to the outer wall of the coffee pot. This causes the coffee to run down the pot and onto the counter, where the cups are sitting (getting that mug bottom soaked in coffee). This is partially caused by the Coanda effect, and partially caused by me not being awake enough to outsmart a coffee pot. The simple solution is to simply increase the flow rate, right? This is correct however, this does not eliminate the Coanda Effect. In fact, even if you are smarter than me you will notice, after you pour the coffee, there is liquid on the side of the pot. That liquid may only be in the form of steam but it’s there, just to a lesser degree. The solution to avoid the mess, is to adjust the pot so that the pour angle is such that gravity overpowers the majority of the Coanda effect. Many times, in my case, this adjustment is too late…

The Coanda phenomena closely depends on several factors, the speed of the jet flow (pouring at a steeper angel), the flow rate (pouring more or less volume over time), and the profile of the container. I believe that a mad scientist invented my particular coffee pot with full intention of messing up countertops all over the world. In fact, he may be a super villain.

At EXAIR, we utilize the Coanda Profile to our benefit on most products. Here are 2 products that are perfect examples of how we use the Coanda Profile to maximize the performance of our products.

Air Amplifiers use the Coanda Effect to generate high flow with low consumption.
Compressed air flows through the inlet (1) to the Full Flow (left) or Standard (right) Air Knife, into the internal plenum. It then discharges through a thin gap (2), adhering to the Coanda profile (3) which directs it down the face of the Air Knife. The precision engineered & finished surfaces optimize entrainment of air (4) from the surrounding environment.

As you can see above, using the Coanda Profile correctly, dramatically increases the efficiency and the entrainment of air in our products. Between the Coanda effect, and the air entrainment, some of our products like the Super Air Amplifiers can output up to 25 times the amount of air that they consume.

Please contact us at anytime to see how the intelligent compressed air products of EXAIR can assist you in your application. And, don’t forget about bed coffee, it’s a win win for you and your spouse…

Thank you for stopping by,

Brian Wages

Application Engineer

EXAIR Corporation
Visit us on the Web
Follow me on Twitter

Cover Photo by monileoni and licensed by Pixabay

Villain image by chrismaguirang and licensed by Pixabay