EXAIR Cold Gun Overview

By using only a source of compressed air, the Cold Gun and High Power Cold Gun produces a stream of clean, cold air 50° (28°C) below your compressed air supply temperature. The Cold Gun is very quiet at only 70dBA and has no moving parts to wear out. Just supply it with clean, dry compressed air and its maintenance free!

From left to right: EXAIR Cold Guns come with Magnetic Bases for instant installation.

The Cold Gun is pre-set to an 80% Cold Fraction. In other words, 80% of the compressed air supplied to it will exhaust from the cold end of the tube, 20% from the hot end. This prevents the Cold Gun from freezing up during use and optimizes the gun’s cooling capacity. The Cold Gun is an ideal alternative to messy and expensive coolant mist systems. It eliminates the cost of purchase and disposal of cutting fluids as well as worker related health problems from breathing airborne coolant or slipping on wet floors. Replacing a coolant based system also eliminates the need for secondary cleaning operations after milling or drilling. See it in Action here;

The Cold Gun is an invaluable tool for machining a wide range of plastics and other materials that may become contaminated when using traditional coolants or oils. The clean, cold air from the outlet of the Cold Gun keeps the part cool, clean, and dry. Take for example this application where an OEM for the plastics industry uses EXAIR Cold Guns in place of a coolant system.

If you have an application that you believe would be better served by the use of an EXAIR Cold Gun, give us a call

Jordan Shouse
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS

EXAIR Cold Gun Prevents Melting of Chocolate During Filling

With Valentine’s Day coming up in the U.S. many of us will be buying chocolates for our significant other. My wife (somehow) doesn’t particularly care for chocolate, so I buy some for her anyway knowing that it will sit around until I eat it. I think most of us would agree that chocolate is even more delicious when melted and drizzled all over the top of just about anything. But, melted chocolate isn’t always a good thing.

I recently worked with a company that manufactures chocolate products. They came out with a new line of small candies and were encountering an issue during packaging. In their process, the chocolates are formed, cooled, and packaged for resale. During the packaging process they were experiencing a problem that caused the chocolates to melt. The bags are heat-sealed along the sides and bottom. This heat was transferring from the bag to the chocolates and causing them to melt. Rather than having a finished package of individual candies, they were melting together to form one large lump. Not exactly what they are hoping to deliver to their consumers.

 

Video of the bag filling process

Fortunately, EXAIR offers a range of different products that are suitable for cooling. For this application, they utilized a Model 5330 High Power Dual Outlet Cold Gun. With the fan-type nozzle installed, they were able to cool both sides of the package immediately after sealing and just before filling the bags with chocolates.

EXAIR’s Cold Gun was a Product of the Year finalist in 2007. Using only a source of compressed air, the Cold Gun and High-Power Cold Gun produces a stream of clean, cold air 50° (28°C) below your compressed air supply temperature. The Cold Gun is very quiet at only 70dBA and has no moving parts to wear out. Just supply it with clean, dry compressed air and its maintenance free! It’s available as both a standard and High-Power option, providing 2x the cooling power. Each style is available with either a single or dual cold outlet flow.

The Cold Gun is pre-set to an 80% Cold Fraction. In other words, 80% of the compressed air supplied to it will exhaust from the cold end of the tube, 20% from the hot end. This prevents the Cold Gun from freezing up during use and optimizes the gun’s cooling capacity. The Cold Gun is an ideal alternative to messy and expensive coolant mist systems. It eliminates the cost of purchase and disposal of cutting fluids as well as worker related health problems from breathing airborne coolant or slipping on wet floors. Replacing a coolant-based system also eliminates the need for secondary cleaning operations after milling or drilling.

If you have an application that you believe would be better served by the use of an EXAIR Cold Gun, give us a call.

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD

Spot Cooling

A new solution to an old problem. Heat build up on dry machining operations reduces tool life and machining rates. The Cold Gun Aircoolant System produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. Operation is quiet and there are no moving parts to wear out. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used.

The Cold Gun is also an alternative to expensive mist systems. It eliminates the costs associated with the purchase and disposal of cutting fluids and worker related health problems from breathing airborne coolants or slipping on wet shop floors.

The standard Cold Gun and High Power Cold Gun incorporate a vortex tube to convert an ordinary supply of compressed air (1) into two low pressure streams, one hot and one cold. The Cold Gun’s hot airstream is muffled and discharged through the hot air exhaust (2). The cold air (3) is muffled and discharged through the flexible hose (4), which directs it to the point of use. Easy mounting and portability are provided through the use of an attached magnetic base (5).

Applications include tool sharpening, drill and cutter grinding, drilling, band saw cooling, plastic machining and setting adhesives. 

EXAIR offers two types, the Cold Gun and the High Power Cold Gun.  The High Power Cold Gun blows twice the amount of cold air as the Cold Gun which doubles the cooling capacity.  They come standard with either a Single Point or a Dual Point Hose Kit with a cone and flat nozzle.  All systems come with a magnetic base and a filter separator.  The magnetic base makes this device simple to attach to your machine and start using. 

Jordan Shouse
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS

Cold Gun Replaces Inefficient and Ineffective Open Pipe

In any machining operation, tool wear is an inevitability. Cutting tools heat up due to friction and this heat contributes to premature tool wear. As tooling wears, poor tolerances and dimensional inaccuracy are common. Additionally, as the cutting edge dulls increased cutting force is required which further increases the amount of heat generated and exacerbates the problem.

Coolants can be used to reduce friction and help mitigate some of the wear, but then you’re left with the mess that coolant brings along with it both on the part and in the machine itself. What if I were to tell you that there’s a way to mimic the effects of coolant, but without all of the mess? All of this can be achieved with a supply of compressed air and one of EXAIR’s Cold Gun Systems.

HP_coldgun_2007finalist

I recently worked with a metalworking company on replacing several open-pipe blowoffs on their CNC machines with EXAIR Cold Guns. The open pipes were not effective at keeping the tooling cool, but did a decent job of blowing away chips. Premature tool wear was leading to increased downtime and slowing production as they were frequently having to replace the tooling. Not to mention, these blowoffs were extremely loud and forced anyone on the shop floor to be wearing in-ear and over-the-ear hearing protection.

Each of their CNC machines had one open-line coolant hose or similarly sized open tube blowing compressed air onto the tool. Temperatures in the facility get fairly warm in the summer and this was having little to no impact. They didn’t want to deal with the mess that comes along with coolant, so they looked to EXAIR for a solution. They ended up installing (1) 5215 Single Point Cold Gun System for trial on one of their machines.

Immediately they noticed the reduction in sound as the Cold Gun operates at just 70 dBA, but they also noticed a 20% reduction in tool wear compared to the open-air lines after a short time in operation. It didn’t entirely eliminate the need for hearing protection as there are other processes occurring, but it did lower it to a point that they weren’t forced to use both in-ear and over-the-ear protection.

EXAIR’s Cold Gun was a Product of the Year finalist in 2007. Using only a source of compressed air, the Cold Gun and High Power Cold Gun produces a stream of clean, cold air 50° (28°C) below your compressed air supply temperature. The Cold Gun is very quiet at only 70dBA and has no moving parts to wear out. Just supply it with clean, dry compressed air and its maintenance free!

The Cold Gun has been preset to achieve maximum refrigeration. This prevents the Cold Gun from freezing up during use and optimizes the gun’s cooling capacity. The Cold Gun is an ideal alternative to messy and expensive coolant mist systems. It eliminates the cost of purchase and disposal of cutting fluids as well as worker related health problems from breathing airborne coolant or slipping on wet floors. Replacing a coolant-based system also eliminates the need for secondary cleaning operations after milling or drilling.

If you have an application that you believe would be better served by the use of an EXAIR Cold Gun, give us a call.

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD