Lately, around the globe, we are all getting a little too used to hearing this from vendors. “Okay, so I have your order for one piece, and that is going to be on hold for 8 weeks until we can get parts in.” At EXAIR, we are able to state our products are in stock and ready to ship same-day on orders received by 2 PM ET that are shipping within the US or Canada. There is no exception when it comes to our brand new 1/4″ NPT HollowStream™ Cone Liquid Atomizing Nozzle.

Since introducing our first liquid only nozzles (no air required) we have been working to add these hollow cone pattern nozzles add to our liquid spray nozzles (complimenting our full cone spray nozzles). There are six flowrate capacities with a 1/4″ NPT inlet. These capacities will range from .06 GPM (.23 LPM) up to 2.5 GPM (9.45 LPM) flow rates. The HollowStream provides a ring of liquid upon your target that can be used for cooling, cleaning, rinsing, or suppression of dust. By only using the outer ring to cover a similar space as a full cone spray the amount of liquid is reduced. This is all done by a pressurized liquid supply.

The small footprint of the nozzle matched with the spray volume and pattern is ideal for tight-fitting areas or areas where manifolds of multiple nozzles are required. The maximum through passage is also large enough to permit some slurries and particulate to pass through when recycling the rinse or wash water is needed.

If you would like to discuss your spray application and determine if the 1/4″ NPT HollowStream Cone Nozzle is right for you, contact us. We look forward to helping you determine the correct product that will make the most efficient use of your resources.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF