EXAIR offers an ever-expanding selection of Atomizing Spray Nozzles. One style with many iterations within the line is the Internal Mix. Internal mix refers to the physical action of the compressed air atomizing the liquid before they leave the air cap. Because this action takes place inside the nozzle, internal mix atomizing spray nozzles are recommended for lower viscosity fluids. Water, water soluble/diluted lubricants, lightweight way oil, or rust inhibitors are a few examples that can easily be sprayed through these nozzles. The nozzles are also able to spray in five different spray patterns.
The Internal Mix Atomizing Spray nozzles are available in Narrow Angle Round Pattern, Wide Angle Round Pattern, Flat Fan Pattern, Deflected Flat Fan Pattern and 360° Hollow Cone Pattern. These nozzles can cover anywhere from 1.5″ diameter up to 13′ diameter and almost any dimension in between. To cover this vast array of spray dimensions they are offered in three inlet port sizes, 1/8″, 1/4″ and 1/2″ NPT.
Each NPT size offers a variable spray pattern as well as liquid flow rates for each type of spray pattern. The 1/8″ nozzles are available up to 28 GPH of flow rate. The 1/4″ nozzles are able to flow up to 42 GPH. The 1/2″ models are able to flow up to 264 GPH. These flowrates can all be varied to minimal flows by adjusting the liquid needle valve. See the video below for a demonstration of that variability.
These nozzles are all easily installed and can be mounted with the available mounting brackets. One for each size.
If you would like to discuss your atomizing spray nozzle application or need help determining if an Internal Mix Atomizing Spray Nozzle is the correct fit for your needs, please contact us.