Eliminate drips to conserve valuable liquids and improve product finishes! EXAIR’s patented No Drip Atomizing Nozzle provides the same great performance as the the standard atomizing nozzles with the added benefit of positive liquid flow stoppage when the compressed air is shut off.
The No Drip option eliminates the occurrence of post spray liquid flow that results in unwanted drips that can mar a finish on painted or coated surfaces. Also, excess liquid loss is minimized saving on expensive materials like chemicals or coatings. When the compressed air is shut-off, the No Drip nozzle positively seals off the flow, eliminating the chance for a drip or lost liquid. Only one compressed air line is needed, as the line to combine and atomize the liquid also provides the no drip operation and control.
The No Drip Atomizing Nozzles are available in (3) types – Internal Mix, External Mix, and Siphon Fed.
The Internal Mix type operates under the principle that the air and liquid come together and mix ‘internal’ to the nozzle. This type provides the finest atomization and smallest droplet size. The Internal Mix type of nozzle can be used with liquids up to 300 cP in viscosity. Both the air and liquid sides are pressure fed. The No drip Internal Mix Atomizing Nozzles are best for pressure fed applications not requiring independent air and liquid control.
The No Drip Atomizing Nozzles are available in (3) sizes – 1/8, 1/4, and 1/2 NPT – to provide a wide range of flow rates and pattern sizes. The No Drip feature does not impact the flow rates compared to the standard models. Minimum air pressure operation is 30 PSIG for the 1/4 and 1/2 NPT, and just 20 PSIG for the 1/8 NPT models.
Like the standard Internal Mix Atomizing Nozzles, spray patterns include narrow and wide angle round, flat fan, deflected flat fan and a 360° hollow circular pattern offering a wide selection to best meet the application needs.
Operation at up to 180 spray cycles per minute is possible. Air and Liquid Caps can be switched out to change the pattern and flow rates.
- Dust Control
- No post spray drip
- Easily used with EFC
- Minimizes air and liquid consumption
- All stainless steel construction
- Fine atomization
- Interchangeable liquid and air caps
If you need an Atomizing Spray Nozzle or any of the EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.
Send me an email
Find us on the Web
Like us on Facebook