EXAIR’s In-Line and Adjustable E-Vacs are a powerful compressed air powered vacuum generator. They’re a low-cost way to create a vacuum for a variety of different applications: pick and place, clamping, chucking, lifting, surface mounting, and vacuum forming are just some of the possibilities. Both the In-Line and Adjustable E-Vacs are available in a variety of different sizes and flows and can accommodate a wide range of applications.
With no moving parts to wear out, EXAIR’s E-Vacs are virtually maintenance free when supplied with clean, dry compressed air. In-Line E-Vacs are available in two different styles: High Volume, Low Vacuum for use with porous materials and Low Volume, High Vacuum for use with non-porous materials.
For pick and place or lifting applications, vacuum cups will be necessary. With a wide variety of different vacuum cups available: Small Round, Large Round, Oval, and Bellows, we can accommodate nearly any size or shape material. For heavier materials, round cups with cleats provide rigidity and ensure that the load remains stable. For applications on textured or uneven surfaces, Bellows style cups have convolutions that allow for the cup to quickly decompress when it touches the surface of an uneven part or material. To determine the most suitable cup, we must consider the weight of the material and the orientation it will be lifted.
If it is being lifted with the vacuum cups positioned horizontally, use a safety factor of 2. For applications where the part or material will be lifted vertically, use a safety factor of 4. This safety factor is then multiplied by the weight of the material. You’ll then need to determine how many vacuum cups are needed. No more than 4 vacuum cups should be used with any one E-Vac. Consider the size/shape of the material to be lifted and place vacuum cups accordingly to evenly distribute the weight. Heavier and larger materials may necessitate the use of more than one E-Vac.
The weight a particular cup can hold at a given pressure is shown in the chart below. Once you’ve determined a suitable cup based on the weight and orientation of the lift, a variety of other accessories are also available.
The vacuum port of the E-Vac has an NPT thread, vacuum cups can be installed directly in this inlet. For applications where the vacuum cup(s) are remotely located, we offer polyurethane vacuum tubing as well as a variety of different fittings to connect them. Both 1/4” and 3/8” O.D. sizes are available in 10’ lengths up to 50’. Simply indicate the model number of the tubing and add the length with a “-“ at the suffix. In addition to fittings and tubing, vacuum check valves are also available. These can be beneficial if there is potential for fluctuations in the compressed air pressure or supply. In the event that there is a significant drop in pressure or loss of compressed air supply, the check valve will ensure that the load remains stable.
To minimize the sound level and ensure you’re adhering to OSHA 1910.95, we have Standard Mufflers as well as Straight Through Mufflers. The Straight Through Mufflers offer the best level of sound reduction, up to 26 dBA!!
With all of the different options making a selection can seem like a daunting task. If you’re struggling to determine the most suitable E-Vac and Accessories for your application, give an Application Engineer a call today!