By using only a source of compressed air, the Cold Gun and High Power Cold Gun produces a stream of clean, cold air 50° (28°C) below your compressed air supply temperature. The Cold Gun is very quiet at only 70dBA and has no moving parts to wear out. Just supply it with clean, dry compressed air and its maintenance free!

The Cold Gun is pre-set to an 80% Cold Fraction. In other words, 80% of the compressed air supplied to it will exhaust from the cold end of the tube, 20% from the hot end. This prevents the Cold Gun from freezing up during use and optimizes the gun’s cooling capacity. The Cold Gun is an ideal alternative to messy and expensive coolant mist systems. It eliminates the cost of purchase and disposal of cutting fluids as well as worker related health problems from breathing airborne coolant or slipping on wet floors. Replacing a coolant based system also eliminates the need for secondary cleaning operations after milling or drilling. See it in Action here;

The Cold Gun is an invaluable tool for machining a wide range of plastics and other materials that may become contaminated when using traditional coolants or oils. The clean, cold air from the outlet of the Cold Gun keeps the part cool, clean, and dry. Take for example this application where an OEM for the plastics industry uses EXAIR Cold Guns in place of a coolant system.

If you have an application that you believe would be better served by the use of an EXAIR Cold Gun, give us a call. 

Jordan Shouse
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS