UL stands for Underwriter Laboratories, a third-party certification company that’s been around for over a century. UL was founded in 1894 and Headquartered in Northbrook, IL. UL is a privately held company with over 14,000 employees and located in over 36 countries*. They certify products with the aim to make the world a safer place for both workers and consumers. Besides testing, they set industry standards to follow when innovating new products. 

EXAIR is UL recognized within our Static Eliminators, Cabinet Cooler Systems and Hazardous Cabinet Cooler Systems. The UL Component Recognized mark below is what you will see on our static eliminating products including our GEN 4 Power Supplies, GEN 4 Ion Bars and Intellistat Ion Air Gun.

This mark is seen least often because it is specifically used on component parts that are part of a larger product system. This component mark is used on a wide range of products including but not limited to power supplies, industrial control equipment and many other products. You will notice the “C” and “US” on either side of the main logo indicating the product has been tested for compliance for both Canada and US requirements.

EXAIR Cabinet Cooler Systems have The “Listed” UL marking indicating that the product meets the requirements and have passed the testing required to gain the mark for specific characteristics.

EXAIR Cabinet Cooler Systems have the following UL Marking indicating they are UL Listed for both Canada and USA requirements.

EXAIR has NEMA 12, 4 and 4X Cabinet Cooler Systems and each are UL Listed to maintain NEMA Integrity:

NEMA 12 (IP54) Cabinet Coolers: (Dust tight, oil tight) are ideal for general industrial environments where no liquids or corrosives are present.

NEMA 4 (IP66) Cabinet Coolers: (Dust tight, oil tight, splash resistant, indoor/outdoor service) incorporate a low pressure relief valve for both the vortex tube and cabinet exhaust. This valve closes and seals when the cooler is not in operation.

NEMA 4X (IP66) Cabinet Coolers: (offer the same protection as NEMA 4 but are constructed of stainless steel for food service and corrosive environments.

Note: some cabinet Coolers have thermostats that are UL Listed and Solenoids which are UL Recognized.

Our Hazardous Cabinet Cooling Systems have been tested by UL and meet the stringent UL requirements for service in use in Class I, Group A,B,C and D. Class II, Group E,F and G. and Class III. EXAIR Hazardous Cabinet Coolers have a UL Marking as shown below:

UL’s Marks for our Classification service appear on representative samples of products that UL has evaluated with respect to specific properties, a limited range of hazards or suitability for use under limited or special conditions. In the Classification service, UL determines that a manufacturer has demonstrated the ability to produce a product complying with UL’s requirements with respect to; specific risk, specific conditions, compliance to regulatory codes & standards, and/or other conditions as determined by UL.

All products carrying any UL mark are subjected to UL’s Follow-Up Services program to regularly confirm continued compliance with UL’s requirements.

If you have questions about our UL recognized products please contact any of our Application Engineers.

Eric Kuhnash
Application Engineer
E-mail: EricKuhnash@exair.com
Twitter: Twitter: @EXAIR_EK

*data and trademarks provided from UL.com
**UL and the UL logo are trademarks of UL LLC © 2022. All rights reserved.