In this summer of 2016, we are nearing the beginning of one of the largest sporting events on the planet, The 2016 Summer Olympics. At the heart of this celebration will be sporting events of all kinds. And in the tradition of the Olympics there is always a gold, silver and bronze winner to award the top three athletes in each event.
EXAIR is participating in a competition as well. It isn’t one of a sporting nature, but rather, one of ingenuity and innovation. Flow Control Magazine holds an annual competition for innovations in new products available in industry and we have entered the No Drip Atomizing Nozzle into the competition.
In general, Atomizing Nozzles are used for the application of high value fluids within industrial processes. In some cases where the Atomizing Nozzles are mounted above the target, residual fluid that is left inside the nozzle body can drip out when de-energized and cause un-wanted blemishes on the target surface.
EXAIR No Drip Atomizing Nozzles allow for external adjustment of compressed air and liquid inputs to adjust the liquid spray flow rate as well as droplet size for a wide range of applications. That’s pretty common amongst atomizing nozzles in general. So what is so innovative about the No-Drip Atomizing Nozzles?
We have found a way to control the on/off function of the atomizing spray which supports the no-drip feature as well as the atomizing flow with only one compressed air supply. Most other manufacturers require a nozzle that has a separate control for the small valve within the nozzle and another for the airflow that atomizes the fluid coming through. It is this innovation that dramatically improves the simplicity with which these nozzles can be installed into an application and controlled through typical air automation techniques. It was innovative enough that the US Patent Office granted EXAIR a patent on the design (Patent # 9156045). So, we’ve made the No-Drip Atomizing Nozzle available with 3 different spray patterns and 14 different liquid volume options to suit a wide variety of application need. Operating pressures can fall anywhere between 30 – 250 PSIG to atomize fluids up to 300 centipoise.
If you agree with the US Patent Office on the innovation and think that EXAIR’s No Drip Atomizing Nozzles should be a winner in this competition, we would appreciate your official vote.
Please vote for the EXAIR No Drip Atomizing Nozzles at this link to the Flow Control Magazine’s Innovation Awards page.
Neal Raker, International Sales Manager email@example.com