EXAIR Cabinet Coolers Are Low-Maintenace and Built to Last

I recently had the pleasure of working with a customer in UAE that manufactures tobacco products. They were duplicating an existing line due to an increase in demand and needed another Cabinet Cooler. The previous unit, HT4325-24VDC, had been installed approximately 20 years ago and was still functioning without any issues. This was long before he had started working with the company and they were unable to locate any order history with EXAIR to determine the appropriate model size to order.

cabinet cooler
HT4325 Cabinet Cooler – 20 years old!!!

They installed the cooler and auto-drain filter that comes with the kit. The only maintenance they’ve had to complete for the system is periodically changing the filter element. The Cabinet Cooler has no moving parts to wear out and requires little to no maintenance so long as it is supplied with clean, dry compressed air.

EXAIR’s UL Listed, CE Compliant Cabinet Coolers are available with Nema 12 (IP54) or Nema 4/4X (IP66) ratings. They’re capable of delivering 275 Btu/hr – 5,600 Btu/hr of cooling capacity and can be thermostatically controlled to reduce compressed air consumption. The rugged nature of EXAIR’s Cabinet Coolers makes them an ideal solution for dirty industrial environments. No longer will you experience shutdowns or downtime due to an overheated cabinet, maintenance required for A/C units, or contamination inside of your enclosure. By purging the cabinet with cool, clean air the EXAIR Cabinet Cooler keeps your cabinet cool while also preventing any dirt, dust, or debris from the ambient environment from wreaking havoc on your sensitive electronics.

The thermostatically controlled systems are pre-set to 95°F, but can easily be adjusted. Check out the video below for a brief instruction of how to adjust the thermostat if you require a different temperature inside the cabinet.

 

 

If you have control panels that are shutting down to excess heat, give us a call. With our Cabinet Cooler Sizing Guide, we’ll just need a few quick measurements and we can easily size the appropriate system for your needs.

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@exair.com
Twitter: @EXAIR_TD

Leave a Reply