EXAIR manufactures three sizes of Vortex Tubes, small, medium & large. Each size can produce a range of cooling power that can be changed by installing a different generator that will change the volume output capability of that Vortex Tube. The generators for small size vortex tubes can operate at 2, 4 or 8 SCFM (maximum cooling power of 550 BTU/HR), generators for the medium size at 10, 15, 25, 30, or 40 SCFM (maximum cooling power of 2,800 BTU/HR) and the generators for the large size operate at 50, 75, 100 or 150 SCFM (maximum cooling power of 10,200 BTU/HR). The Vortex Tube is sold with one generator installed.
The generators are marked with a number and a letter. The number indicates the capacity (SCFM of air consumption) and the letter indicates the type of operation (“R” for maximum refrigeration or “C” for maximum cold temperature). The maximum refrigeration (“R”) works best when the majority of the inlet air is exhausted out the cold end of the Vortex Tube. They work most efficiently with smaller temperature drops and larger volume of flow than the other generators. The maximum cold generators (“C”) can produce temperatures below 0°F, and work best when the minority of the inlet air is exhausted out the cold end of the Vortex Tube. The volume of cold air produced is less but you will experience greater temperature drops.
If a different cooling capacity is desired, other generators are available by either purchasing them individually or by purchasing one of the (3) highly versatile Vortex Tube Cooling Kits designated as the 3908 (small), 3930 (medium) or 3998 (large). The Kits include the Vortex Tube, Filter Separator, Vinyl Tubing, Tubing Adapter, Tube Clamps, Cold End Muffler (Optional Hot End Muffler Available) and Both “R” & “C” Generators.