Static Elimination for Tight Spaces or Areas Sensitive to Airflow

Published on by

If you’re having problems with static build up on small and/or lightweight materials where even the smallest amount of airflow can disturb the product, EXAIR has the perfect solution, the EXAIR Gen4 Ionizing Point.  The Gen4 Ionizing Point is a single point ionizer that lends itself naturally to winding, rewinding, slitting or a myriad of other applications.  It can even be mounted through the wall of a duct to neutralize static charges in an existing air or conveyance duct.

Gen4 Ion Point 1
EXAIR’s Ion Point In Action

The Gen4 Ionizing Point is very powerful and robust solution that can dissipate 5,000 volts in .24 seconds from 2″ (51mm) away!  The Gen4 Ionizing Point features an electromagnetically shielded high-voltage cable that is armored to protect against abrasion and cuts and its integrated ground design does not require a separate ground connection.  For even more convenience the Gen4 Ionizing Point is replaceable if the point should ever become dull or bent.

Ionizing Point Performance

Its smaller footprint naturally lends itself to installation into the limited space normally associated with smaller applications.  The stainless steel, and replaceable, emitter point is mounted in a saddle that is 1.77″ (45mm) long by 1″ (26mm) wide and includes two .20″ (5mm) mounting holes that are 1.44″ (37mm) apart for easy mounting.

Gen4 Ion Point 3

Gen4 Ionizing Points are supplied power by either the model 7960 power supply which can operate up to two ionizing products or the 7961 that can operate up to four ionizing products.  Both models feature selectable voltage to run on either 115 VAC or 230 VAC.

The Gen4 Ionizing Point is the perfect solution for spot static elimination without air assistance.  Most importantly both the EXAIR Gen4 Ionizing Point and Gen4 power supplies are UL component recognized to US and Canadian safety standards, and are CE and RoHS compliant.

g4_7960-7961emoti600x
All EXAIR Gen4 Static Eliminators use one of two Power Supplies – your choice of the 2-port Model 7960, or the 4-port Model 7961.

When you are looking for static relief application assistance or expert advice on safe, quiet and efficient point of use compressed air products give us a call.   We would enjoy hearing from you!

Steve Harrison
Application Engineer
Send me an email
Find us on the Web 
Follow me on Twitter
Like us on Facebook

Leave a Reply