Air Nozzles and Guns to Clean Inside Tube, Pipe, and Hoses

Back Blow Air Nozzle Family

EXAIR manufactures three different sizes of Back Blow Air Nozzles to clean inside tubing, pipes, hoses, and channels.  The 360o rear airflow pattern can “wipe” the entire internal surface clean from coolant, chips, and debris.  They are constructed of 316SS, making these nozzles robust and durable.

Our smallest Back Blow Nozzle is the Model 1004SS.  It has a M4 X 0.5 male thread and can clean diameters ranging from ¼” (6.3mm) to 1” (25.4mm).  Model 1006SS has a ¼” NPT air connection for cleaning inner diameters ranging from 7/8” (22mm) up to 4” (102mm).  Our largest Back Blow Air Nozzle is the model 1008SS.  It has a 1” NPT connection, and it can be used inside diameters ranging from 2” (51mm) to 16” (406mm).

Now, what can make these unique types of air nozzles even more useful?  Attaching them to an EXAIR Safety Air Gun.  In this blog, I will go through each of our Back Blow Safety Air Guns that EXAIR can offer from stock.

Model: 1604SS-6-CS

VariBlast Compact Back Blow Safety Air Gun:

The unique feature that sets the VariBlast apart from other small air guns is the force variability.  The valve is designed to control the opening to allow for a variable force with the same nozzle.  The VariBlast is made from a durable cast aluminum construction for tough industrial use.  It has a rugged ergonomic grip with a user-friendly trigger.  The compressed air inlets are located in two different positions to select the best fit for your application.

With the model 1004SS Back Blow nozzle, the VariBlast Compact Back Blow Safety Air Gun is a small but powerful tool that can clean inside smaller pipes, tubes, and hoses.  They come standard with extension tubes and a Chip Shield.  The extension tubes range from 6” (152mm) to 36” (914mm) to extend deep inside cavities and openings.  The Chip Shield is made from a durable polycarbonate material that will protect your operators during use.

Model 1204SS-6-CS and 1206SS-6-CS

Soft Grip Back Blow Safety Air Guns:

The next air gun in this series is the Soft Grip Safety Air Gun.  With an ergonomic soft handle and full-grip trigger, the Soft Grip Safety Air Gun can be used for hours without fatigue.  EXAIR offers two types of Back Blow Nozzles with the Soft Grip; model 1004SS and model 1006SS.

As a “bigger cousin” to the VariBlast above, the Soft Grip Back Blow Safety Air Gun with the model 1004SS has extensions ranging from 6” (152mm) to 36” (914mm) as well as a Chip Shield.  The Soft Grip with the model 1006SS Back Blow Nozzle has extensions that range from 6” (152mm) to 72” (1,829mm) in length with a Chip Shield.  Both of these types of Soft Grip Back Blow Safety Air Guns are great products in allowing you to clean inside a greater variety of diameters and lengths.

Heavy Duty Back Blow Safety Air Gun:

For rough industrial environments, EXAIR offers the Heavy Duty Safety Air Guns.  They come with a composite rubber grip and a wide curved trigger.  It has a 3/8” NPT inlet for increased compressed air flow for those “tough” cleanings.

The Heavy Duty Back Blow Safety Air Gun comes standard with the model 1006SS Back Blow Nozzle, an extension pipe, and a Chip Shield.  The extensions lengths can range from 6” (152mm) to 72” (1,829mm).  If you need a tough air gun for rugged areas to clean inside pipes and tubes, the Heavy Duty Back Blow Safety Air Gun could be the best candidate for your application.

Super Blast Back Blow Safety Air Gun:

As our largest model, the Super Blast Back Blow Safety Air Gun has the strongest blowing force.  They can clean large areas inside pipes, channels, and tubes ranging from 2” (51mm) to 16” (406mm) in diameter.  It has a soft foam grip for easy handling and a spring-loaded manual valve that will turn off if dropped.  The model 1008SS Back Blow Nozzle is mounted to an extension that is either 1 foot (0.3m), 3 feet (0.9m), or 6 feet (1.8m) in length.  With a 1” NPT inlet, the Super Blast Back Blow Safety Air Gun will generate a strong blast of air for cleaning and removing troublesome material.

If you need to clean inside tubes, hoses, channels, pipes, etc., EXAIR has the perfect product, the Back Blow Air Nozzles.  They can remove the dirty coolant, chips, and debris in a non-contact way.  EXAIR offers these nozzles with our VariBlast, Soft Grip, Heavy Duty, and Super Blast Safety Air Guns for manual cleaning operations.  EXAIR stocks these Safety Air Guns for fast delivery.  And if you are located in the U.S.A or Canada, we offer a 30-day unconditional guarantee.  You can try them out and see how effective, safe, and powerful they are in improving your internal cleaning processes.  If you need more details, you can contact an Application Engineer at EXAIR.  We will be happy to help you.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s