One of the most common and dangerous hazards that occur within a manufacturing and production facility is the noise level within the plant. Noise is measured in units known as decibels. Decibels are a ratio of the power level of the sound compared to a logarithmic scale. If an employee is an exposed for too long to high levels of noise, they can begin to lose their hearing. That is where the OSHA 29 CFR 1910.95 regulation comes into play.
This OSHA standard doesn’t just provide the protection against noise in the work place but monitoring as well. Companies shall provide at no cost audiometric tests for all employees to ensure that no damage is being to the hearing of all personnel. This program is to be repeated every six months and the results are to be made accessible to all personnel.
Hearing is very important to our everyday lives and must be protected due to the fact that once it is damaged hearing loss cannot be lost be repaired. The OHSA 29 CFR 1910.95 is there to protect and monitor this dangerous hazard in the workplace so that all employees can go home safe and sound.
Here at EXAIR we design all of our products to safe and quite. Weather it is using one of our mufflers for vortex tubes or E-vac’s or one of our super air nozzles we strive to meet and exceed the OSHA standard. One could also purchase EXAIR’s Digital Sound Level Meter which can give a accurate and responsive reading of how loud your compressed air sources are.
For more information on EXAIR’s Digital Sound Level Meter and any of EXAIR‘s Intelligent Compressed Air® Product lines, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.