Calibration – Keep Your Meters True

EXAIR offers meters to measure the level of physical parameters such as sound and static. Each meter has sensitive electrical circuitry and a periodic calibration is recommended to ensure the meter readings are tried and true.

The model 9104 Digital Sound Level Meter is an easy to use instrument that measures and monitors the sound level pressure in a wide variety of industrial environments. The source of loud noises can be quickly identified so that corrective measures can be taken to keep sound levels at or below OSHA maximum allowable exposure limits.

The sound meter comes from the factory with an NIST (National Institute of Standards and Technology) certificate of accuracy and calibration.  As a good practice, EXAIR recommends a yearly calibration of the instrument, and we offer a service that calibrates the unit to the same NIST standards and provide a written report of the calibration.

The model 7905 Static Meter allows easy one-hand static measurements.  It is useful in both locating sources of high static charge and checking the reduction of static after treatment with an EXAIR Static Elimination product.  The unit is sensitive and responsive, and indicates the the surface polarity of objects up to +/- 20 kV when measured from 1″ away.

It is also recommended that the Static Meter be calibrated on a yearly basis.  EXAIR offers (3) levels of calibration service.  The first two provide calibration in accordance with MIL Standards using accepted procedures and standards traceable to NIST.  The third calibration service conforms to the same Mil Standard, as well as ISO/IEC standards.

Annual calibration service of your EXAIR Digital Sound and Static Meter, along with proper care and storage, will keep your meter performing tried and true for many years, providing accurate and useful measurements.

To initiate a calibration service, give us a call and an Application Engineer will issue an Returned Good number, and provide instructions on how to ship the meter to EXAIR.

If you have questions regarding calibration services for your meters or would like to talk about any EXAIR Intelligent Compressed Air® Product, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

OSHA 29 CFR 1910.95 – Standard on Occupational Noise Exposure

Last week, the EXAIR Blog featured an article about the OSHA Standard 1910.242(b) – Reduction of Air Pressure below 30 psi for Cleaning Purposes.  This week, we will review another OSHA standard that affects many of you in manufacturing and other industries.

OSHA 29 CFR 1910.95 – Standard on Occupational Noise Exposure discusses the effects of noise and sets limits for exposure.  Occupational noise can cause hearing loss, and also interfere with concentration and communication, disrupting the job performance. Below is a summary from the standard of the Permissible Noise Exposure (OSHA Table G-16)

OSHA Noise Level

From the chart, the time an employee can be exposed to loud noise is greatly reduced as the sound level goes up.   The use of hearing protection is helpful but relies on the operator to use consistently and correctly.  Ear plugs or ear muffs can be uncomfortable and hot, leading to possible reduced usage.  OSHA can come on site, and if violations to the sound level exposure limits are found, they can impose fines and mandate corrective action be taken place.

The recommended course of action when an operator is subjected to sound exceeding those in the chart above is to enable feasible administrative or engineering controls. Engineering controls is the arena in which EXAIR can be a great resource.

The first step in understanding and addressing any sound level issues is to measure the sound. The easy to use Digital Sound Meter, model 9104 shown below, allows for accurate testing of noise levels throughout the facility.  Noisy areas can be quickly identified, leading to review, design and implementation of the engineering controls.

SoundMeter_new_nist225

Some of the worst offenders for noise violations is compressed air usage.  A prime example would be inefficient blowoffs, used for cooling, drying, or cleaning.  Open pipe, copper tube or drilled pipe are a few of the common culprits.  Not only do they consume excessive amounts of compressed air, they can produce noise levels above 100 dBA.

EXAIR manufactures a wide variety of engineered products that utilize compressed air and deliver it in a controlled manner.  This allows for the most efficient use of compressed air and keeps the sound levels much lower than the inefficient methods.  A Super Air Knife can replace a drilled pipe, reducing sound by as much as 20 dBA, while using 50-70% less compressed air.  An engineered Super Air Nozzle can replace an open pipe or copper tube and reduce sound levels down to 74 dBA, and even down to 58 dBA for the smallest available nozzles.

EXAIR has been providing Intelligent Compressed Air Products since 1983.

If you have questions regarding noise limits and how to solve any issue with an EXAIR Intelligent Compressed Air® Product, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

 

EXAIR Leads the Way with Standards and Certifications

For over 34 years, EXAIR has been the industry leader in providing Intelligent Compressed Air Products to the industrial marketplace. While much of our focus is to ensure our products are engineered to provide optimal performance, we are also dedicated to manufacturing products that meet a wide range of standards and directives to promote safety in relation to plant personnel.

 

For instance, all of our compressed air operated products meet or exceed OSHA Standards 29 CFR 1910.242(b), requiring that the outlet pressure of an open pipe, nozzle, air gun, etc., when used for cleaning purposes, must remain below 30 PSI when dead-ended against the skin, as well as Standard 29 CFR 1910.95(a) as a way to protect workers from job related injuries related to dangerous sound levels of 90 dBA and higher.

 

 


Many of our products are also CE Compliant, meeting the mandatory requirements for products intended to be sold in the European Economic Area or “EEA”. For example our Electronic Flow Control and Electronic Temperature Control (ETC) meet the EU (European Union) Low Voltage Directive 2006/95/EC.

 

 

EXAIR electrically powered devices, like our Static Eliminators and Digital Flowmeters for example, comply with the “Restriction of Hazardous Substances” or RoHS Directive 2011/65/EU, including the amendment outlined in the European Commission decision L 214/65.

 

 

We are also committed to providing material that supports the conflict mineral free rule to help aid in the relief of illegal trade of exotic materials, like tungsten, gold, tin and tantalum in the DRC region. Using the CMRT 4.20 template, we document our supply resources to ensure we provide conflict free products, as outlined in Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act.

 

Lastly, the European Union introduced the REACH program – Registration, Evaluation, Authorization and Restriction of Chemicals, as a method to register chemical substances being imported into the EU to protect people and the environment, per Regulation (EC) No 1907/2006 Title I, Article 3.  Also noted in the program, Title II, Article 7, they state that any product with a substance intended to be released under normal operating conditions, must be registered for quantities totaling more than 1 metric ton per year. Since EXAIR products do not intentionally release or contain any such substances, registration to meet the program is not required.

 

If you have any questions about any of these Standards or Directives or about which EXAIR products comply, please feel free to contact an application engineer for assistance. We’d be happy to help!

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

Engineered Air Nozzles Reduce Noise Levels and Outlet Pressure, Meeting OSHA Requirements

“My operators are complaining that our air guns are too loud, how can you help me?” – is a very common inquiry we receive here at EXAIR on almost a daily basis. Many open end blowoffs or air guns fitted with nozzles that have cross drilled relief holes create high pitch wind shear, resulting in excessive noise levels, sometimes exceeding 100+ dBA. This not only is a safety concern but also an OSHA violation.

Variety of Air Nozzles that produce dangerously loud noise levels

Loud noises and the length of exposure time can lead to significant health concerns such as long term hearing loss, increased stress levels and potential injury due to lack of concentration. The Occupation Safety and Health Administration (OSHA) introduced Standard 29 CFR 1910.95(a) as a way to protect workers from job related injuries associated to potentially dangerous sound levels. Per the Standard, at 90 dBA an operator is limited to a maximum of 8 hours of constant exposure. As noise levels increase, the allowable exposure time decreases, in some cases slowing production, costing a company on their bottom line.

 

EXAIR’s Air Nozzles are engineered so they entrain surrounding air across the profile of the nozzle, which produces a smoother airflow, ultimately reducing wind shear, resulting in much lower sound levels, meeting the OSHA Standard.

Illustration showing the air travel of our Super Air Nozzles

 

In addition, our Air Nozzles also meet the OSHA Standard 1910.242(b) for 30 PSI dead end pressure. All of our engineered Air Nozzles provide a relief or a safe path for the air to exit if the nozzle were to be blocked or pressed against an operator’s body so the exiting air pressure will never reach 30 PSIG.

All of EXAIR’s Air Nozzles are available with standard NPT threads to easily adapt to existing air guns. We also off our full line of Safety Air Guns which are fitted with our engineered nozzles, providing an “off-the-shelf” OSHA compliant solution. For help selecting the best product to replace your existing device or if you have a new application you would like to discuss, give us a call at 800-903-9247.

Justin Nicholl
Application Engineer
justinicholl@exair.com
@EXAIR_JN

 

EXAIR Air Guns Increase Safety And Reduce Air Use

Many times we receive calls from customers that fall right in line with our focus here at EXAIR  – providing Intelligent Compressed Air Products that improve overall safety for operators and plant personnel in industrial operations as well as reduce compressed air usage, ultimately lowering energy costs. Such was the case last week when I received an inquiry from a customer who was looking for a handheld device that could easily attach to their existing air hose to replace the loud and inefficient homemade air nozzles they are currently using to blow off steel chips and coolant from their saws and drills. Their current set up includes a combination of smashed air guns, similar to the one shown below, some small open tubes and cheap plastic nozzles. The blowoffs were working but their operators were starting to complain about excessive noise during operation and notice the compressor in the area was running continuously during the cleaning cycle. Their first proposed solution was to lower the supply pressure which did lower the sound level and air usage somewhat, but now the exiting airflow wasn’t powerful enough to clear the debris. After doing an internet search they decided to reach out to EXAIR for assistance.

crushed-gun

Crushed guns create high pitch wind shear and provide no relief path for the air to exit safely

All of the Safety Air Guns we offer utilize our Air Nozzles which are engineered to meet or exceed OSHA Standard CFR 29 – 1910.95(a) for allowable noise exposure levels. As the Standard reads, when employees are subjected to sounds in excess of 90 dBA, some type of engineered controls should be used to lower the sound to a permissible level. Prolonged exposure to excessive noise can result in serious health issues, like tinnitus or a constant ringing of the ears, as well as stress and reduced productivity. In addition, our engineered Air Nozzles cannot be dead ended, meeting OSHA Standard 1910.242(b). With the design of our Air Nozzles, there is always a safe path for the air to exit so the outlet pressure will not reach 30 PSIG if the nozzle exhaust were to be blocked or pressed against the skin.  Due to this design, our units are safe to operate at higher pressure, resulting in a high velocity, forceful airflow.

1210

Model 1210 – Soft Grip Safety Air Gun

For this application, I recommended the customer use our Model # 1210 Soft Grip Safety Air Gun. This particular unit incorporates our Model # 1100 Super Air Nozzle which produces a low sound level of 74 dBA, well within the OSHA guidelines, and consumes only 14 SCFM @ 80 PSIG while having the necessary power to solve their application.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

EXAIR Leads the Way with Product Standards

Standards seem to continually get introduced and updated. There is an ever increasing number of local, regional, federal, and even global standards to comply with.  We pay close attention to these standards and have the largest number of standards upon our products.

meets or exceeds oshaThe standards the every EXAIR product meets or exceeds are the OSHA standards for dead-end pressure as well as allowable noise level exposure.  The dead-end pressure directive is OSHA standard 29 CFR 1910.242 (b).  The standard refers to the fact that compressed air can be dangerous when the outlet pressure of a hole, hose or copper tube is higher than 30 psig (2 BAR).  In the event the opening is blocked by a hand or other body part, air may enter the bloodstream through the skin, resulting in a serious injury.  All of the compressed air products manufactured by EXAIR have been designed for safety.  All are safe to be supplied with higher pressure than 30 psig and still meet or exceed the OSHA standard.

The OSHA standard 29 CFR – 191.95 (a) refers to the maximum allowable noise exposure that an operator is permitted to be exposed to for a given period of time.   The chart of allowable exposure times is shown below.   All EXAIR products are engineered to create the minimum amount of noise while efficiently utilizing compressed air.   Many times blow offs are cross drilled to permit air to escape in order to meet the OSHA standard for dead end pressure, this process increases the noise level generated by that blow off considerably.

OSHA Noise Level

One of the most stringent compliance that EXAIR has upon its products is the UL/CUL listings and recognition.  All EXAIR Cabinet Cooler Systems are UL listed, we were the first to insure your electrical cabinet’s NEMA integrity remained by putting our Cabinet Cooler systems to the UL test. This means that the Underwriters Laboratories have deemed these products safe for operation throughout the US and Canada per their standards that are applicable for each of the product groups.   The products undergo numerous tests and scenarios to ensure that an operator will be safe during the normal operation of the units.   The tests for the Cabinet Cooler Systems includes environmental exposure for the given NEMA type of the enclosure along with many other tests.  The Static Eliminator Power Supplies are also UL listed.

cULlistedcULrecognized

CE is another standard which EXAIR pays great attention to to meet or exceed. CE is a standard that is normally preferred when dealing with countries outside of the US but is gaining popularity within the states as well.  CE being a European standard actually stands for a french phrase, “Confrmité Eurpéene” which is translated to “European Conformity”.  Any EXAIR product displaying the CE mark conforms where there are applicable directives.CE

The RoHS directive is targeted on heavy metals that are generally found within electronics.  Substances like Mercury, Lead, Polybrominated biphenyls, Cadmium, or Hexavalent chromium.  In order to meet the RoHs directive a product must have 100 parts per million or less of mercury and for other substances there must be less than 0.01% of the substance by weight in a raw homogeneous materials level. All EXAIR products which are electronic or contain electronic devices are compliant to the 2002/95/EC RoHS directive, also including the amendment outlined in the European Commission decision L 214/65.  This includes all EXAIR Static Eliminators, Electronic Flow Control, and Electronic Temperature Control products.ROHS_Vector

EXAIR maintains records to be sure our supply chain is providing product which meets the conflict mineral free guidelines of the Dodd-Frank Act.  EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products. When requested we will even provide the needed forms to support our customer’s efforts in complying with the Dodd-Frank Act.

conflictfree

REACH, is another European Community Regulation this time on chemicals and their safe use.  REACH is targeted to ensure personnel and environmental health by identifying the intrinsic properties of chemical substances easily.  REACH stands for Registration, Evaluation, Authorization and Restriction of Chemical substances and was written into law in 2007. EXAIR products are not required to be registered per Title II, Article 7, paragraph 1  of the legislation since they do not contain substances that are intentionally released.   This is to ensure compliance with Regulation (EC) No 1907/2006 Title I, Article 3, paragraph 3, the European Union requires registration of chemicals and substances imported into the EU to ensure a high level of protection of human health and environment.

Reach

 

To conclude, when there is a safety audit, safe sourcing directive or some other form of standard/conformance that you need to meet, consider EXAIR compressed air products. Please contact us to find out if we can help you meet or exceed those standards.

Brian Farno
Application Engineer Manager
BrianFarno@EXAIR.com
@EXAIR_BF

Survey Says…Many Customers Have Similar Concerns

Family Feud

After the busy and enjoyable long weekend I have found myself looking back through some logs and have compiled a brief list of the most common issues we receive from Consultants on their customers’ compressed air systems.  The list is also what we commonly see and hear as issues from direct customers also.  The list is below.

  • Pressure drops in the compressed air system
  • Lack of measurement for flow / pressure within the system
  • Contaminants / moisture within the air
  • Leaks
  • Lack of engineered point of use solutions

That is a pretty short list that can cover a large amount of issues within a compressed air system.  So let’s see if we can shine a little more light on these issues.

Pressure drops in the compressed air system are more often than not a piping system issue.   The pressure drop could possibly occur when the point of use device is consuming  more air than the supply pipe or system can give it, or when you have a piping system that is undersized for the length of pipe that is installed – For instance, 50′ of 1/4″  schedule 40 pipe can only flow approximately 11 SCFM.  The best solution I can recommend is to ensure you are always utilizing  an Intelligent Compressed Air® Product at all applicable points of use. EXAIR Intelligent Compressed Air Products are engineered to reduce air volume at the point of use and conserve as much compressed air as possible.  So keep your compressed air supply lines properly sized and rely on engineered solutions at the point of use to keep your end use product running as efficiently as possible. Pressure regulators can also be added to fine tune the incoming pressure to a lower pressure or just enough pressure for a successful application.

The lack of measurement devices for flow and pressure within the system can be easily solved by installing flow meters and pressure regulators with gauges.   EXAIR Digital Flowmeters, pressure regulators, and even just pressure gauges are readily available and  in stock ready to ship direct to your facility.  The Digital Flowmeters are available for 1/2″ iron pipe through 4″ iron pipe (copper also available) to fit nearly any of the hard piping you may have within your system. These flow meters require only 2 small holes into the compressed air pipe and provide a readout or data logging capabilities to monitor your compressed air. Pressure regulators with gauges can keep your end use pressure to minimum in order to conserve compressed air and the gauge provides the valuable measurement so you can remain aware of legs/areas you may be able to lower overall pressure. Knowing how much air is flowing through the system along with what pressure your point of use devices are at can make optimization of the system a lot easier.

Contaminants and moisture in the air can easily be remedied by utilizing one of the EXAIR auto drain filter separators as well as an oil removal filter.  By using the auto drain filter separators the units will only dump the waste material once they have reached a certain level within the filter bowl.  This means no need for a timer based drain system which can become costly if there is no moisture to dump at that time. Keeping the supply air clean and contaminant free will also prevent wear of the end use products and keep them operating at peak performance.

Leaks are always hard to find.   This is why EXAIR offers the Ultrasonic Leak Detector, this device will help you pin point the compressed air leaks in your piping system.   The easy to read LED indicator as well as the adjustable sensitivity scale make the handheld device very easy to use.   Remember, just because you can’t personally hear the leak doesn’t mean that a leak is not there.   An Ultrasonic Leak detector can identify leaks we are unable to hear so you may locate and repair them which will further optimize your system.

The lack of engineered point of use solutions is even easier to troubleshoot.   Simply contact an Application Engineer here at EXAIR and we will help you determine which product from our selection is right for your situation.  Engineered products are designed with maximum efficiency and safety in mind. Whether you are coating, conserving, cooling, conveying, or cleaning with compressed air, chances are we have a solution for you.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

%d bloggers like this: