## Determining Leakage Rate and Cost of Compressed Air Leaks

The electricity costs associated with the generation of compressed air make it the most expensive utility within an industrial environment. In a   poorly maintained compressor system, up to 30% of the total operational costs can be attributed simply to compressed air leaks. While this wasted energy is much like throwing money into the air, it can also cause your compressed air system to lose pressure. This can reduce the ability of the end use products to function properly, negatively impacting production rates and overall quality. Luckily, it’s quite easy to estimate the leakage rate and is something that you should be including in your regular PM schedule.

According to the Compressed Air Challenge, a well-maintained system should have a leakage rate of less than 5-10% of the average system demand. To estimate what your leakage rate is across the facility, first start by shutting off all of the point of use compressed air products so that there’s no demand on the system. Then, start the compressor and record the average time it takes for the compressor to cycle on/off. The compressor will load and unload as the air leaks cause a pressure drop from air escaping. The percentage of total leakage can be calculated using the following formula:

Leakage % = [(T x 100) / (T + t)]

Where:

The leakage rate will be given in a percentage of total compressor capacity lost. This value should be less than 10% for a well-maintained system. It is not uncommon within a poorly maintained system to experience losses as high as 20-40% of the total capacity and power.

A leak that is equivalent to the size of a 1/16” diameter hole will consume roughly 3.8 SCFM at a line pressure of 80 PSIG. If you don’t know your company’s air cost, a reasonable average is \$0.25 per 1,000 SCF. Let’s calculate what the cost would be for a plant operating 24hrs a day, 7 days a week.

3.8 SCFM x 60 minutes x \$0.25/1,000 SCFM =

\$0.06/hour

\$0.06 x 24 hours =

\$1.44/ day

\$1.44 x 7 days x 52 weeks =

\$524.16 per year

A small leak of just 3.8 SCFM would end up costing \$524.16. This is just ONE small leak! Odds are there’s several throughout the facility, quickly escalating your operating costs. If you can hear a leak, it’s a pretty severe one. Most leaks aren’t detectable by the human ear and require a special instrument to convert the ultrasonic sound created into something that we can pick up. For that, EXAIR has our Model 9061 Ultrasonic Leak Detector.

Implementing a regular procedure to determine your leakage rate in the facility as well as a compressed air audit to locate, tag, and fix any known leaks should be a priority. The savings that you can experience can be quite dramatic, especially if it’s not something that has ever been done before!

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@exair.com