TURN IT DOWN!!! My wife screamed at 6:00am the morning of our first NFL Sunday. As a lifelong Cincinnati Bengals fan, it’s been a tradition in our house for me to wake everyone up while blaring Guns N’ Roses “Welcome to the Jungle” first thing in the morning each and every week 1. After 13 years together you’d think she would be prepared for this by now, but I still get her every time.
You may also hear your maintenance manager screaming to turn it down while out in the shop. They’re not talking about music volume. They’re more concerned about the compressed air pressure you’re using.
In any application necessitating the use of compressed air, pressure should be controlled to minimize the air consumption at the point of use. Pressure regulators are available to control the air pressure within the system and throttle the appropriate supply of air to any pneumatic device. As the last of the six steps to optimizing your compressed air system, controlling air at the point of use can often be overlooked.
Pressure regulators utilize a control knob that is turned to either increase/decrease tension on a spring. The spring puts a load on the diaphragm which separates internal air pressure from the ambient pressure. Typically made of a flexible rubber material, these diaphragms react very quickly to changes in the air supply. By either increasing or decreasing the flow of air based on the load on the diaphragm, downstream pressure remains fairly constant.
While one advantage of a pressure regulator is certainly maintaining consistent pressure to your compressed air devices, using them to minimize your pressure can result in dramatic savings to your costs of compressed air. As pressure and flow are directly related, lowering the pressure supplied results in less compressed air usage. EXAIR recommends operating your Intelligent Compressed Air Products at the minimum pressure necessary to achieve a successful application. If you notice a desirable result at a pressure of 60 PSIG, or even less, there’s no need to run full line pressure. In-line point of use pressure regulators are the simplest and most reliable way to allow you to dial down to the pressure to any compressed air operated product.
When selecting a pressure regulator for your application, it’s critical that it is appropriately sized to supply adequate volume to the point of use devices downstream. Doing so, minimizes the risk of experiencing “droop”. Droop is a decrease in outlet pressure from the specified setting due to an increase in flow rate. Droop occurs when the demand at the point of use exceeds the volume of air that the regulator can supply. By ensuring the pressure regulator is rated to deliver sufficient volume of air, you’ll reduce the chances of experiencing droop. EXAIR offers pressure regulators in kits along with many of our products, we’ve done the hard part for you and made sure they’re properly sized!
If you’re looking for ways to help lessen the demand on your compressor, EXAIR’s team of Application Engineers will be happy to help. Reach out to us via phone, chat, or e-mail and see for yourself just how easy it can be to start saving compressed air!
Tyler Daniel, CCASS
YouTube. (2009). YouTube. Retrieved September 21, 2022, from https://www.youtube.com/watch?v=o1tj2zJ2Wvg.