EXAIR Atomizing Spray Nozzles for Coating, Cleaning, Cooling

A recent customer in the automation / tool making industry had a need to spray a mold release agent onto some specialized tooling. Originally, the customer had planned to use some sort of pressurized sprayer. After some initial tests to prove the concept, the customer found that the moving mechanical parts of the sprayer became fouled by the release agent. And cleaning the internal parts was not easy to do.

No Drip Atomizing Nozzle
No Drip Atomizing Nozzle

In their search for a more permanent solution, the customer came across EXAIR Atomizing Nozzles. After going through some application type questions to narrow the focus down to one model, we determined that the customer would be best served by model AF1010SS (Internal Mix, Flat Fan Pattern Atomizing Nozzle). The customer had a couple of questions about the nozzle in order test the product.

  1. Is it possible to disassemble the nozzle and clean it completely? The answer is yes, the Atomizing Nozzles can be completely disassembled to allow for cleaning, maintenance or replacement of worn parts.
  2. Are the nozzles solvent resistant? The answer is also yes; the Atomizing Nozzles are made of AISI303 type stainless steel and can be cleaned with any normal solvent based cleaner.

Earlier in this article, I mentioned that we went through some application type questions. Here is a list of general questions that we normally ask a customer about their application in order to determine which in our selection would be best suited.

  1. What is the volume of liquid flow (G/Hr) needed for the application?
  2. What is the viscosity (cP) of the liquid being applied?
  3. What are the required spray pattern, size and shape required?
  4. Is the liquid under pressure (by pump or pressure pot)? If so, what is the liquid pressure?
    1. Side note: we have options for non-pressurized liquid by using our siphon fed nozzles.

If you have an application where you have a liquid that needs to be applied in atomized form to a target, or perhaps a humidification application, please give EXAIR Atomizing Nozzles your consideration.

Jordan Shouse
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s