360° Air Wipe Comparison for Extrusion, Hose, Cable, Pipe and Wire Blowoff or Cooling

When it comes to blowing off extrusions, cables, pipe, tubing, hose, or wire, the EXAIR Super Air Wipe is an ideal product that often stands alone in this field. From time to time I will receive a call asking about a block style blowoff for wire or cabling, maybe even small extrusion, and the Super Air Wipe is always there to provide a true 360° blowoff compared to what the customer is used to.

See, the block style blowoffs are similar to the SAW in they both offer a clamshell design that will open and close into place around the product to prevent the user from having to “thread the needle”.  Also, they both operate off compressed air. The means by which they deliver the air is where the stark contrast in performance begins.

First, let us take a look at how these block style blowoffs deliver the air to the product being blown off. Generally, inside of these, there are a couple holes on each half of the block that are drilled at an angle to deliver the air onto the surface of the product. These block style products have to be kept fairly close in diameter to the product so that the air contacts the surfaces and they are for the most part offered in smaller sizes only.

Now, how does the Super Air Wipe deliver the air to the product being blown off?  The air enters (1) into an internal chamber that fills (2) and then dispurses through a continuous gap (3) on each half of the wipe that is set by a shim. The shim can be interchanged with different thicknesses to give a course adjustment to the volumetric flow of air. The air then follows the Coanda profile (4) of the Super Air Wipe to maximize entrained air (5) and exits at a 60° included angle (6) to impact the surface of the part at a full 360°.

Stock Super Air Wipe Product OfferingBlock Style air wipes also have a tendency to operate very loudly, often exceeding 90 dBA and more. This will affects personnel directly and can also affect their communication when attending to a processing line.  Super Air Wipes operate at 82 dBA with 5″ and smaller diameters. Up to 89 dBA for diameterss from 6″-11″.

The Super Air Wipe is available in eleven sizes from stock in aluminum (up to 11″ dia.) while the stainless steel configurations are available in five sizes from stock (up to 4″ dia.).  If aluminum or stainless steel don’t fit the requirements of an application, custom sizes and materials are always available with short lead times.

Tight-fitting locations are ideal for a Super Air Wipe install.

If you notice that the block style air blowoff is leaving streaks or maybe the physical space requirements of the block are too much to fit into your production line, please contact an Application Engineer and let us help you determine which Super Air Wipe is going to be right for your needs.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF