Machining plastics can be a difficult task as the contact between the part and the tool generates heat, which can result in the plastics beginning to melt and stick to the tooling, causing deformities or even broken tool heads. Often times, companies will introduce a liquid based method of cooling to quench the parts during machining, while this does work, with plastics they tend to absorb some of the liquid, resulting in the finished part being outside the allowable tolerance range. Another area of concern is the mess that liquid cooling creates as now the parts need to be dried and cleaned before they can continue to the next process.
Such was the case last week when I worked with an OEM who was looking for a way to cool the tooling in the machines they build for the plastics industry. The company they were selling the machines to, specifically asked for an alternative method of cooling without using any type of coolant due to the conditions mentioned above. Once again, EXAIR has the perfect solution – the Cold Gun. Incorporating a Vortex Tube, the Cold Gun produces a cold air stream at 50°F below compressed air supply temperature and provides 1,000 Btu/hr. of cooling capacity. Fitted with a magnetic base and flexible hose the unit can be mounted virtually anywhere on the machine and the cold airflow can be easily directed to provide cooling to the critical area. The system also includes a filter separator for the supply line to remove any water or contaminants, ensuring that the exiting airflow is clean and free of debris.
When looking for a reliable method of cooling, whether machining plastics or other material, the cold, clean air from the Cold Gun is the ideal solution in place of messy misting systems. For help with your spot cooling needs or to discuss how using Vortex Tube technology could help in your process, give me a call, I’d be happy to help.