It’s Getting Hot. A Good Reason For a Cabinet Cooler Bonus

It would appear that the heat is here, as my car has a thermometer which I am pretty sure lied to me on Sunday when it was reading 97°F.  I think perhaps it was, but it is getting hotter all across the country and that means we are fielding the calls on electrical cabinets and equipment breaking down due to heat issues.   This is all happening just in time for our new promo.

ccJUL_ACsensor186x149

That’s right, order any of the Cabinet Cooler® Systems listed and receive a free A/C Sensor Pen.  This pen has saved me from getting shocked many of times around my home.   Of course, every time I can’t find my A/C Sensor I have had faith I turned the correct breaker off and as soon as I touch the outlet to change it out I get hit with 110V.

 

We are here to assist your choice of Cabinet Cooler system and to provide a very fast solution to the downtime you are experiencing. We manufacture Cabinet Cooler systems from 275 Btu/Hr through 5600 Btu/Hr with NEMA 12, 4 and 4X integrity. If you don’t know what Cabinet Cooler System you need, take a look at the form below. It can be found on our site, get the information and call, fax, e-mail or live chat with an Application Engineer to get a quick and accurate response on what amount of cooling your system will need.

Sizing Guide

 

Over our thirty years in business we have also seen many companies who only experience a short span of seasonal heat and have found that 2000 Btu/Hr is enough refrigeration to offset summertime heat load, in most cases. Choosing a model with a thermostat control will turn the cooler on and off as needed and minimize compressed air use. Cabinet Cooler systems are in STOCK and ship same day for domestic and Canadian orders received by 3:00 pm EDT. We can get your cabinet cooled FAST and eliminate your heat related problems. Cabinet Cooler systems are shipped ready to install through a standard electrical knockout. There is no waiting for oil to settle back into the compressor motor, no mounting templates required or huge holes to cut into your cabinet. Cabinet Cooler systems have no moving parts to wear, making them rugged and lasting in your hot environment.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s