Oil Removal Filters – Keeping Compressed Air Clean

Compressed air filters help to keep the air clean and condensate free to protect equipment from dust, dirt, pipe scale, oil and water. Even though the compressed air system will typically have a main dryer, additional treatment is often necessary. For this discussion, we will focus on the oil removal process and filter type.

After the compressed air has passed through a particulate filter, the dirt, dust and water droplets have been removed.  Oil that is present is much smaller in size, and mostly passes though the particulate filter.  The installation of a coalescing filter will provide for the removal of the majority of the fine oil aerosols that remain. The coalescing filter works differently than the particulate filters. The compressed air flows from inside to outside through the coalescing filter media. The term ‘coalesce’ means to ‘come together’ or ‘form one mass.’  The process of coalescing filtration is a continuous process where the small aerosols of oil come in contact with fibers of the filter media. As other aerosols are collected, they will join up and ‘come together’ and grow to become an oil droplet, on the downstream or outside surface of the media.  Gravity will then cause the droplet to drain away and fall off the filter element.

Example of a 0.03 Micron Coalescing Oil Removal Filter

Some important information to keep in mind –

  • Change the filter regularly, not just when the differential pressures exceeds recommended limits, typically 5 PSI
  • Coalescing filters will remove solids too, at a higher capture rate due to the fine level of filtration, using a pre-filter for solids will extend the life
  • Oil free compressors do not provide oil free air, as the atmospheric air drawn in for compression contains oil vapors that will cool and condense in the compressed air system.

If you would like to talk about oil removal filters or any of the EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s