Over the last few months, my EXAIR colleagues and I have blogged about several different types of air compressor types including single and double acting reciprocating, rotary screw, sliding vane and rotary-scroll air compressors. You can click on the links above to check those out. Today, we will examine centrifugal air compressors.
The types of compressors that we have looked at to date have been of the Positive Displacement type. For this type, an amount of air is drawn in and trapped in the compression area, and the volume in which it is held is mechanically reduced, resulting is rise in pressure as it approaches the discharge point.
The centrifugal air compressors fall under the Dynamic type. A dynamic compressor operates through the principle that a continuous flow of air has its velocity raised in an impeller rotating at a relatively high speed (can exceed 50,000 rpm.) The air has an increase in its kinetic energy (due to the rise in velocity) and then the kinetic energy is transformed to pressure energy in a diffuser and/or a volute chamber. The volute is a curved funnel that increases in area as it approaches the discharge port. The volute converts the kinetic energy into pressure by reducing speed while increasing pressure. About one half of the energy is developed in the impeller and the other half in the diffuser and volute.
The most common centrifugal air compressor has two to four stages to generate pressures of 100 to 150 PSIG. A water cooled inter-cooler and separator between each stage removes condensation and cools the air prior to entering the next stage.
Some advantages of the Centrifugal Air Compressor-
- Comes completely packaged fort plant air up to 1500 hp
- As size increases, relative initial costs decrease
- Provides lubricant-free air
- No special foundation required
A few disadvantages-
- Higher initial investment costs
- Has specialized maintenance requirements
- Requires unloading for operation at reduced operational capacities
EXAIR recommends consulting with a reputable air compressor dealer in your area, to fully review all of the parameters associated with the selection and installation of a compressed air system.
If you would like to talk about air compressors or any of the EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.
Images Courtesy of the Compressed Air Challenge