I was recently working with a process Engineer at a food packaging plant on installing a Super Air Knife to blow excess water off a food product. This product was moving single file on a conveyor belt with about 6 feet between each product. The belt was moving pretty slow so we wanted to turn the air knife on only when the product was in front of the knife, which saves compressed air and energy. To do this we used the ELECTRONIC FLOW CONTROL (EFC). If the knife ran the entire time it would be wasting any air blowing during one of the 6′ long gaps. This would also put an unnecessary strain on their already taxed compressed air system. The EFC let him only supply air to the Knife when it saw a product on the belt. To read more about the EFC click here!
This application worked perfectly, but they had one other issue. Throughout the day it seemed as if they were losing compressed air pressure at the knife. What they found was during peak compressed air usage in the plant the compressor couldn’t keep up with the demand. Fear not, the Super Air Knife was only running for 7 seconds and was off for 20 seconds. This was a perfect application for EXAIR’s Receiver Tank.
Receiver Tanks are great for applications that require an intermittent demand for a volume of compressed air. This can cause fluctuations in pressure and volume throughout the compressed air system with some points being “starved” for compressed air. EXAIR’s Model 9500-60 60 Gallon Receiver Tank can be installed near the point of high demand so there is an additional supply of compressed air available for a short duration. The time between the high volume demand occurrences should be long enough so the compressor has enough time to replenish the receiver tank.
If you have a process that is intermittent, and the times for and between blow-off, drying, or cooling allows, a Receiver Tank can be used to allow you to get the most of your available compressed air system. If you need any assistance calculating the need for a receiver, please let us help.
Note – Lee Evans wrote an easy to follow blog that details the principle and calculations of Receiver Tanks, and it is worth your time to read here.
If you would like to talk about any of the EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.
Send me an email
Find us on the Web
Like us on Facebook