EXAIRs’ Vac-u-Gun is a low cost solution to a wide variety of industrial housekeeping problems. The Vac-u-Gun is a a vacuum gun, a blow gun and a transfer tool all in one. The durable die cast construction has no moving parts to wear out and is lightweight and easy to use.

The Vac-u-Gun uses less compressed air than ordinary blow guns. It injects a small amount of compressed air through directed nozzles to produce a vacuum on one end and a high output of flow on the other. The amplified output flow is 12 times the air consumption rate.

The Vac-u-Gun offers a more efficient way to blow-off, cool dry and clean. In vacuum mode, work surfaces can be easily cleaned by vacuuming the debris away instead of blowing it off the surface only to sweep it up later. in the blow mode the Vac-u-Gun has a large 1-1/4″ (32mm) diameter allows it to cover more surface area in less time compared to ordinary air guns. Transferring materials over long distance is also possible using the smooth bore vacuum hose.

Versatile; in seconds, the Vac-u-Gun can be transformed from a powerful vacuum gun into an efficient blow gun or into a transfer tool for lightweight materials. Each Vac-u-Gun comes complete with a set of attachments to suit numerous industrial applications. If you have questions or would like to purchase please contact me or any of our Application Engineers.

Eric Kuhnash
Application Engineer
E-mail: EricKuhnash@EXAIR.com
Twitter: @EXAIR_EK