Custom Products Are Never Out Of The Question

I recently had a customer contact me about an application they had in house where they utilized our Stainless Steel Adjustable Air Amplifier.  For the application, the customer was passing a product through the center of the Adjustable Air Amplifier and using it to dry / cool the part.   The issue was the part would sometimes rub the throat diameter of the Air Amplifier and this would cause it to stick and blemish the surface finish of the part.   This of course was unacceptable and caused down time for the customer.

That is when the customer contacted us here at EXAIR and asked if we could possibly do some form of non stick coating or make the throat of the Amplifier out of a non-stick material.  So we did.

IMG_3114

This is a Special Stainless Steel Adjustable Air Amplifier with Teflon constructed plug.   The entire plug has been machined from a solid piece of Teflon.   This will allow the customer to run at full production speed and not have to worry about the product “sticking” to the walls of the Adjustable Air Amplifier.

So if you think you have a weird application or need something special, don’t hesitate to contact us.   We might just be able to get you out of a sticky situation.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s