It is a very sad day for me at EXAIR… No, I’m not retiring or leaving the company, but today is my last day to write about Plant Engineering Product of the Year Awards …for this year. It has been quite an honor to write about four of our best innovations from the last year over the past weeks. In case you missed the entries, you can click on the these links to read more about our other 2013 award winners: 316 Stainless Steel Dual Cabinet Coolers, 1 Inch Flat Super Air Nozzle or the Heavy Duty HEPA Vac. Today’s post is about the No Drip External Mix Atomizing Nozzle, which the readers of the Plant Engineering magazine bestowed the gold award for fluid handling products. EXAIR’s Liquid Atomizing Nozzles combine the liquid of your choice with compressed air to create a mist of atomized liquid. The external mix nozzles have the highest liquid flow rate of any of EXAIR’s Liquid Atomizing Nozzles with flow rates up to 60 GPH. They are a great solution for applications where independent air and liquid control is required. Additionally, more viscous fluids can be used with the external mixing of the nozzle than either the internal mixing or siphon fed nozzles. External Mixing Nozzles can be used to atomize liquids up to 800 centipoise. In addition to the benefits of the external mix atomizing nozzle, this spray nozzle features a valve to positively stop liquid flow, when the compressed air drops below 30 psig. Any time you need to maintain a smooth finish or are spraying an expensive liquid, the no drip function can be invaluable to preventing rework, and ensuring a quality finish on each and every product. The EXAIR no drip function is patent pending and does not require an additional air line to control the no drip mechanism, simplifying installation and functionality.