Intelligent Compressed Air Products: Pulling In Free Air

Home of Intelligent Compressed Air Products

EXAIR is the home of Intelligent Compressed Air Products.

What is an Intelligent Compressed Air product? What makes it intelligent? Compressed air is typically a manufacturing facility’s most expensive utility. A standard cost is $0.25 per 1,000 Standard Cubic Feet (SCF) produced. Any pipe, manifold, or fitting can be modified to blow compressed air, but these homemade blow offs will be very noisy, waste a tremendous amount of compressed air and create an OSHA violation. In contrast EXAIR’s intelligent compressed air are engineered solution are quiet, use a minimal amount of compressed air and comply with OSHA safety standards.

Let’s take EXAIR Model 1100 Super Air Nozzle as an example. Connecting it to a 1/4 NPT fitting, will produce 13 ounces of force on a target when mounted twelve inches away, and use 14 SCFM of compressed air. To produce so much force using that little air, the Super Air Nozzle must be precisely designed and manufactured to maximize the entrainment of ambient air.

With the air nozzle we use compressed air to induce a primary air flow. This primary air flow is a high velocity jet of air that create low pressure area around the primary airflow entraining the ambient or free air. These air streams combine past the tip of the nozzle creating a powerful blast of air. The Super Air Nozzle can entrain air up to a ratio of 25 parts of ambient air moved for every 1 part of compressed air.  All of our Super Air Nozzle create this level of air entrainment.

AirflowAnimation

EXAIR Super Air Nozzle entrains ambient air up to a 25:1 ratio

In addition to entraining a significant amount of air, the Super Air Nozzle also reduces the noise level. Most homemade nozzles are not well constructed so, the hole(s) that allow the air to escape may have sharp jagged edge which will induce noise or turbulence. Even commercial nozzles with cross drill holes create a tremendous amount of wind shear which leads to an ear splitting compressed air squeal. The smooth design of the Super Air Nozzle creates a laminar flow of air that reduces the noise of the nozzle to 74 dBA. For reference a 1/4″ open tube can easily create noise levels over 100 dBA. Using a compressed air nozzle, can greatly reduce the amount of noise in and around your shop.

Finally, EXAIR Super Air Nozzle complies with OSHA standard 29 CFR 1910.242, which requires that all nozzles that use compressed air over 30 PSIG must provide a point of relief in case the nozzle is dead ended. EXAIR Super Air Nozzle uses multiple orifices that are recessed, so that the air always has a path of escape. Many homemade nozzles do not have any provision to protect from dead ending, which means they do not comply with the OSHA standard.

EXAIR Super Air Nozzles are an important upgrade from a homemade nozzle and many times an upgrade for a commercial nozzle, because they entrain ambient air, reduce noise level, and comply with OSHA regulation.

Dave Woerner
Application Engineer
@EXAIR_DW
DaveWoerner@EXAIR.com

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: